|
|
Shop by Category:
|
|
|
Product Specifications
|
|
Part #:
SPARING
|
|
Manufacturer:
Solar Sun Rings
|
|
|
|
Back to Top
|
|
Product Description
|
The Solar Spa Sun Ring is a passive solar spa heating device made from two sheets of heavyweight U.V. resistant vinyl. The upper clear layer focuses sunlight on the translucent blue colored lower layer. The blue layer absorbs about 50% of the sunlight and converts it to heat. The balance of the sunlight is allowed to pass through for deep water heating.
Spas without covers lose much of their heat overnight and regain very little of that heat during the day. At night, the contained air acts as an insulating blanket to retain heat gained during daylight hours. The contained air also helps retain a considerable amount of heat supplied by your heater. With the Solar Spa Cover, your spa will lose less temperature overnight and will heat up faster, saving you money. Solar Spa Covers are equipped with 6 magnets to improve clarity and decrease the hardness of spa water. Covers may be used on all chlorine or salt water system spas whether in-ground or above ground.
Solar Spa Ring will help your spa:
- Reduce heat loss
- Reduce water loss
- Reduce chemical usage
- Regain heat during the day
Using the same principles of
the Solar Sun Ring for pools, the patented and affordable Solar Spa Cover provides
a great alternative to a bubble or foam spa blanket. Solar Spa Cover will fit
spas from 68" to 102". The cover is built with three outer air chambers;
inflate all three for spas from 94" to 102". Inflate 2 and cut-off 1
for spas from 80" to 93". Remove 2 and inflate 1 for spas from 68"
to 80".
Click for more Swimming Pool
Covers
|
|
|
|
Back to Top
|
|
|