By Marlig Industries


Details

Top

Model # 8OZFAL

Alternate Part #'s MGI-50-851, MLIFIXALEAK8

Product Description

Try Fix-A-Leak before you call for expensive leak detection services or repairs!  

This patented formula is made of a concentrated material designed to seal leaks in pools and spas.  Fix-A-Leak can provide a permanent seal for holes up to 1/8 inch diameter in the walls, floor, shell, and suction and plumbing lines.

  • 48 hours to harden and cure
  • Use 1 quart for pools up to 22,000 gallons
  • Use 4 oz per 250 gallons for spas
  • Safe for salt chlorine systems
  • Easy to follow instructions right on the bottle

Product Specifications

Size:
8 oz.
Top

?     Asked on 1/19/2009by Guest

Can you use this product to stop a leak in a vinyl liner pool?
 Reply

A  Answered on 1/19/2009 by InyoPools Product Specialist Patrick P.

This product will stop a pin hole leak in a vinyl liner pool if the leak is at the floor of the pool. The chemical is heavier than water so it will sink to the bottom.
 Reply


?     Asked on 1/26/2012by Guest

Is Fix-A-Leak safe for salt water pools?
 Reply

A  Answered on 1/26/2012 by InyoPools Product Specialist Patrick P.

Yes, Fix-A-Leak is safe for salt water pools and the salt cell does not have to be removed from your plumbing.
 Reply


?     Asked on 2/10/2012by Guest

How do I use Fix a Leak?
 Reply

A  Answered on 2/10/2012 by InyoPools Product Specialist Patrick P.

Depending on the type of leak you are looking to repair, there are certain steps you must take before and after using the product. If you are using Fix-A-Leak to seal a pinhole leak in a pool liner you will want to set your filter vale to recirculate. If you don't have a filter valve on your filter then you can remove the filter element from the filter. Once this has been done you can slowly pour the product through the skimmer. The product has very simple instructions on the container. If you want to see Fix-A-Leak in action, feel free to check out this > >video.
 Reply


?     Asked on 2/20/2012by Guest

What is the optimal water temperature to use Marlig Fix-a-Leak?
 Reply

A  Answered on 2/20/2012 by InyoPools Product Specialist Patrick P.

The manufacturer suggests that the water temperature should be 70 degrees fahrenheit or above.
 Reply


?     Asked on 12/20/2012by Guest

Does my pump and filter need to be running when I add Fix A Leak?
 Reply

A  Answered on 12/20/2012 by InyoPools Product Specialist Patrick P.

Yes, the pump and filter need to be running when Fix A Leak is added to the pool.
 Reply


Top

Review Summary

 (Average 4.5  out of 5 stars)
12 Rating
5 star:
 
(6)
4 star:
 
(6)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Helpful Review


The Most Recent Reviews