Stenner Pump w/ 15 Gal. Gray Tank System - S1G85MJL1A2S

$539.99

IN STOCK
FREE SHIPPING

Model # S1G85MJL1A2S

By Stenner Pump Company

  5 Average  

Details

Top

Model # S1G85MJL1A2S

Product Description

The STS tank series is an all-in-one group and taken system that offers easy chemical replenishment and convenience. The unit is pre-assembled at the factory to help reduce installation time. The pump is mounted vertically for spill containment and includes a rain roof to prevent liquid intrusion into the motor housing. The tank systems are shipped with the single head Classic series pump models.

Features

  • Pre-assembled for quick and easy installation
  • Rain roof and spill recovery set-up included
  • Polyethylene construction with containment basin
  • Incremental level indicators
  • Polypropylene locking child-resistant lid
  • Compact, attractive styling
  • Tank with Pump
  • Dimensions: 20-1/2" OD x 25-1/4"
  • Color: Gray (UV resistant)

Pump Specs. (Different Pumps Available Upon Request)

  • 120 Volt 60HZ
  • Gallon Per Day Output 0.3 to 5.0
  • Fix feed
  • Discharge Pressure 0-25 PSI
  • Amp Draw 1.7 Amps @ 120 Volts
  • Dimensions (L X W X H) 10.6" X 13.4" X 6.0"

Product Specifications

Color:
Gray
Size:
15 gal.
Top

?     Asked on 4/10/2019 by Paul B Novotny

I want to use this pump as an acid injection system for my pool. Can I wire it directly to my Pentair Easytouch control panel so I can utilize the Easytouch scheduling?
 Reply

A  Answered on 4/12/2019 by InyoPools Product Specialist Lennox H.

Hi, Paul. You will not be able to wire this system directly to your Pentair EasyTouch controller. The IntellipH Canister w/ Controller - 521377 will be a better option. 
 Reply


?     Asked on 3/20/2019 by Donald Cislo

Can I use this to pump acid? I need to dispense 1 1/2 gallon a week.
 Reply

A  Answered on 3/24/2019 by InyoPools Product Specialist Lennox H.

Hi, Donald. Yes, this system can be used with acid and can be adjusted to dispense approximately 1.5 gallons a week. 
 Reply


?     Asked on 9/7/2018 by Sean

Does this pump have a relay on it that i can tie into my existing pool controller?
 Reply

A  Answered on 9/7/2018 by InyoPools Product Specialist Lennox H.

Hi, Sean. Unfortunately, it does not. 
 Reply


?     Asked on 6/19/2018 by Andy

Eexactly how does the feed tube from stenner connects into the chlorinator manifold? Is there a diagram showing the connection? What spare parts are recommended with the unit. Thanks
 Reply

A  Answered on 6/19/2018 by InyoPools Product Specialist Lennox H.

Hi, Andy. It will not connect into the chlorinator manifold. See the Stenner STS Tank & Pump System Installation Instructions for details.   
 Reply


?     Asked on 6/17/2018 by Andy

I will be removing my Rainbow Chlorinator 320. Is that where the Stenner tube gets installed? Are necessary fittings included with the pump and tank? Lastly, what is the rate of chlorine dispensed? (GPD)
 Reply

A  Answered on 6/18/2018 by InyoPools Product Specialist Lennox H.

Hi, Andy. Yes. This system will be installed as the last piece of equipment on the return side. This unit can dispense 0.3-5.0 gallons of chlorine per day. 
 Reply


?     Asked on 5/22/2018 by Joe

The parts description listed in one of the questions describes 1/4" OR 3/8" tubing and nuts/ferrules? Also, it is not specified as to whether the tubing will be clear or UV Black? Please specify EXACTLY the parts that come with this before I order and spend this kind of money. Thank you.
 Reply

A  Answered on 5/23/2018 by InyoPools Product Specialist Patrick P.

Hi Joe, Sorry for the confusion on the product description. This system will come with 1/4" UV Black Tubing made out of Santoprene. The nuts/ferrules are included.
 Reply


?     Asked on 5/14/2018 by Joe

I have already submitted a question about 4 days ago but did not receive any type of reply. I see where there is a parts description about the fittings that come with this but I do not see any type of saddle clamp or seals that seems like would be needed to plumb into my existing 2 1/2 inch pvc plumbing? Please advise if the included parts will allow to plumb straight into my existing pvc plumbing?
 Reply

A  Answered on 5/15/2018 by InyoPools Product Specialist Lennox H.

Hi, Joe. This system includes the pump pre-mounted, along with accessories (connections) for an initial standalone application.  
 Reply


?     Asked on 5/10/2018 by Joe

I see the parts list in above post but am a little confused. I am trying to plumb this into my existing 2 inch pvc plumbing that is going into pool. Are the parts needed for that included, as I do not see any type of saddle clamp or seals for which to use to plumb in the tubing?
 Reply

A  Answered on 5/15/2018 by InyoPools Product Specialist Lennox H.

Hi, Joe. This system includes the pump pre-mounted, along with accessories (connections) for an initial standalone application.  It does not include saddle clamps but the injector fitting assembly. You can reference the Installation Instructions and Spec Sheet
 Reply


?     Asked on 11/8/2017 by

What is the correct ratio for water to acid when filling this tank?
 Reply

A  Answered on 11/8/2017 by InyoPools Product Specialist Lennox H.

Hi. A  4:1 dilution of 20° Baume hydrochloric acid 31.45% by weight or equivalent is required. 
 Reply


?     Asked on 8/2/2017 by

Will the UV protection of the gray tank maintain the strength of liquid chlorine without degradation in direct sunlight?
 Reply

A  Answered on 8/4/2017 by InyoPools Product Specialist Lennox H.

Hi. Yes, it will allow the chlorine to last longer. 
 Reply


?     Asked on 12/28/2016 by Fabio

Can this pump w/ tank system work standalone? I have Auto Pilot nano salt water chlorination and need to feed acid to lower PH. I do not have any type of pool automation or controls. thanks.
 Reply

A  Answered on 12/29/2016 by InyoPools Product Specialist Andy O.

Hello Fabio- To use the Stenner Pump w/ 15 Gal. Gray Tank System - S1G85MJL1A2S you will need at the very least a Chemistry Kit 1, pH and ORP Sense, ORP Dispense - AQLCHEM.
 Reply


?     Asked on 1/16/2013 by Guest

Can this pump be used to deliver liquid chlorine to my pool? I would like to make sure that the pump tubing and pump head can tolerate non-diluted liquid chlorine.
 Reply

A  Answered on 1/16/2013 by InyoPools Product Specialist Patrick P.

The S1G85MJL1A2S Stenner Pump w/ 15 Gal. Gray Tank System can be used with liquid chlorine if the strength of the sodium hypochlorite is less than 15%.  You would have to check with the supplier of the sodium hypochlorite to find out the strength.
 Reply


?     Asked on 9/21/2008 by Guest

Is this tank covered and weather resistant for outdoor installation?
 Reply

A  Answered on 9/21/2008 by InyoPools Product Specialist Patrick P.

Yes this tank is covered and designed for outdoor installation.
 Reply


?     Asked on 12/18/2007 by Guest

What is included with this pump system?
 Reply

A  Answered on 12/18/2007 by InyoPools Product Specialist Patrick P.

The following accessories are included:  3 Connecting nuts (1/4" or 3/8"); 3 Ferrules w/ 1/4" & 6 mm OR 2 ferrules w/ 3/8"; 1 Injection check valve (100 psi) OR (1) injection fitting (25 psi); 1 Weighted strainer; 1 20' Roll of suction/discharge tubing 1/4" or 3/8" white or UV black OR Europe 6 mm white; 1 Spare pump tube; 1 Mounting bracket; 1 Installation and maintenance manual
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)