Part # 9995541-R1
Alternate Part #'s 9995541-ASSY, 87-111-1394, DL9995541R1, MAY9995541-R1, MAY9995541R1
Active Brush Assembly - 9995541-R1
Used on the following units:
Can you buy just the bearings for this assembly. It is about an inch and a quarter plastic bearing that goes in the end assembly of this brush. If not the bearings can you buy just the gear and end assembly. I don’t need the whole brush. We just have one bearing that is bad.
Reply
Hi, Thomas. Unfortunately, replacement parts are not available for this Active Brush Assembly - 9995541-R1.
Reply
will part # 9995541-r1 fit a dolphin supreme m4?
Reply
Hi Walter, the correct active brush assembly for the Maytronics Dolphin Supreme M4 robotic pool cleaner is part number 9995540-ASSY.
Reply
Less than 1 hr
Screwdriver
Unplug the dolphin, remove the four screws from the old assembly. The new assembly fits perfectly in the space from the old, insert new screws that are included. I plugged the dolphin back in and returned to the pool, so easy.
1 to 2 hrs
Screwdriver
2 0
- I gave the Dolphin a thorough cleaning to remove all debris from the cleaner.
- I removed the bottom brush to see why the Dolphin wasn't moving even though there was clearly power to the unit.
- I got lucky and saw a ball bearing fall from the Dolphin. After closer inspection I could see ball bearings on one side of the brush but not on the other side.
- I knew this would impact the unit's ability to move and decided to order the replacement brush assembly at about 10% of the cost for a new unit. We were fortunate... It worked!!
-
The Most Recent Reviews
(5 out of 5 stars) Crawler not crawling
Reviewed By: Inyo Customer ()
Dolphin had power but was not moving. I got lucky and saw a ball bearing fall from the unit. I ordered a replacement brush assembly and the unit is working good as new!
Was this review helpful to you?