$666.99
By J & J Electronics
Model # LPL-S1C-120-100-P
Warranty 3-year
Manufacturer Code LPL-S2C-120-100-P
Alternate Part #'s LPL-S1C-120-100-P
COLOR SPLASH™ XG Series LED IN-GROUND POOL AND SPA LIGHT
J&J’s Color Splash XG Series is a multi-color LED pool and spa lighting fixture that brings lighting integration to the pool industry. Operating effectively with popular automation systems or your standard pool light wall switch, J&J’s XG Series enables the consumer to realize the full benefit of Color Splash LED light fixtures. The XG light fixtures enable consumers to utilize their Pentair® and Jandy® automation systems with J&J’s color rich and efficient LED Pool Light Fixtures. The XG synchronizes with J&J’s LXG Series replacement lamps. With five solid color and seven lights shows, instantly transform any in-ground pool into a custom illuminated paradise. These LED Pool Light Fixtures offer the ideal ambiance for playing, relaxing or entertaining while providing immediate energy cost savings.
Color Splash Advantages:
Interested in the Color Splash lighting. The part # given to me by J & J Electronics was LPL-F2C-120-100-PSQ. Your part number is LPL-F2C-120-100-P. Is this the same part?
Thanks!
Reply
Hi, The LPL-S1C-120-100-P and LPL-F2C-120-100-PSQ are not the same. The LPL-F2C-120-100-PSQ is a polished finish that can fit into a Swimquip Niche.
Reply
Is there a controller required for this LED light or can I just replace the existing 120v halogen light fixture with it and connect the same?
Same question for the 12V model.
Reply
Hi Bob, no extra controller is needed for this unit. You can use what ever system you are using now.
Reply
I currently have a Hayward SP0525SLED100. It no longer works and apparently is not repairable. Will this fit in a hayward niche? I do not want to replace with a Hayward due to the reliability issues
Reply
You will need to confirm if you have either Hayward niche models SP0604C, or SP0600U. And if so, then yes, this light would fit.
Reply
How do you check the niche and is there a safe way to splice wires for something like this
Reply
Hi, Kim. You can check the niche by locating the model of taking the measurement. You cannot splice the wire into an existing wire.
Reply
Is this a direct replacement for my American Products PN 98711300? Ie there is no modification necessary to niche?
Hi Jamie, please see this J & J Colorsplash datasheet to see the compatible Pentair niches that can be used with this light fixture. Your niche should have the niche model marked on the inside of it.
Reply