$569.00

Qty:

Details

Top

Part # PL7431

Warranty 18 Year (2 Years Full)

Alternate Part #'s 201836RECES48SAPGRN

Product Description

PURELINE: CUTTING EDGE SAFETY COVERS
Our Pureline Safety Cover is renowned in the industry for its strength, durability, and ease of installation. In addition, it is a maintenance-free cover that provides pool owner complete peace of mind during the off-season that their pool investment is not only protected against the elements but also, will not pose a danger to unexpected visitors.

KEY FEATURES

The new, improve and increased weave count contained within our polypropylene mesh fabric ensures added strength, sustainability and shading protection
Contains our patented mesh material blend, which eliminates any standing water hazards by allowing water and melting snow to drain through and minimizing damage risk, as well
Automatically screens out dirt and debris for a quick, easy and fuss-free springtime opening
Created with the finest materials in the industry for strong, safety-first protective results
Secures pool from children, pets and stray animals.
Designed to be a tamper-proof design by preventing entry without the need for an installation rod, which means it can be installed and removes within mere minutes
Improves the look of your pool in the off-season.
Fastest turnaround times in the industry!*
Meets or exceeds all safety cover performance standards as set forth in ASTM F 1346-91.
Upgraded 18-Year Limited Warranty.

Click here for more Pool Safety Covers

Product Specifications

Color:
Green
Cover Size:
20 x 38 ft.
Material:
Mesh
Pool Size:
18 x 36 ft.
Warranty:
18 yrs
Top

?     Asked on 8/17/2016by Inyo Visitor

Are there seconds available in these covers. I need a cover to temporarily cover 18 x 36 pool w/center end steps for a few months prior to filling pool in. Thanks,
 Reply

A  Answered on 8/18/2016 by InyoPools Product Specialist Joe S.

Good afternoon, this cover will have 5x5 spacing with 28 Anchors 65 inches apart.
 Reply


?     Asked on 8/23/2016by Inyo Visitor

does this safety cover block the sun light out? Also does the rain water drain through into the pool?
 Reply

A  Answered on 8/24/2016 by InyoPools Product Specialist Joe S.

Hello, yes this unit will allow water to pass through and block up to 99%  sunlight Penetration.
 Reply


?     Asked on 9/10/2016by Michael Lewis

How many feet do I need on the sides? I have 2 feet 8 inches.
 Reply

A  Answered on 9/13/2016 by InyoPools Product Specialist Stacey M.

Hello Michael, There is a 3 foot minimum.
 Reply


?     Asked on 9/10/2016by Inyo Visitor

Is this cover shaped as shown for roman end pools?
 Reply

A  Answered on 9/11/2016 by InyoPools Product Specialist Stacey M.

Hello Meredith, this is how it is shaped in the picture, if it is any different you need to fill out custom cover sheet. http://media.inyopools.com/documents/form/Inyo-Safety-Cover-Measuring-Form-2015.pdf
 Reply


?     Asked on 9/10/2017by william patrick

Does the w/ 4x8 mean the additional piece that is added for the steps? Also, what are the actual outside dimensions of the cover before adding the "step piece". Thank you
 Reply

A  Answered on 9/10/2017 by InyoPools Product Specialist Lennox H.

Hi, William. The cover has an additional 4' x 8' section for the steps. The cover is 20' x 38' not including the step section.
 Reply


Top
Difficulty

Est. Repair Time

4 to 8 hrs

Tools Needed

Hammer drill, shop vac, hammer, chalk line

1     0

First Time Install of Mesh Winter Safety Cover

Written on 11/14/2019 by Guest

I just recently installed the Mesh Winter Safety Cover for the time and solo. Following the instructions were straight forward. Some tips I could give are:

1. Have a friend help roll it over the pool. Otherwise, everything else can be done solo.

2. When slipping on the buckle and spring, the instructions say to leave 4 inches between the buckle and cover edge, but if you look at the diagram it shows 3 inches. Use the 3 inches. I think the 4 inches considered the 1-inch buckle length.

3. I used a hammer drill to drill the concrete holes. I would recommend a rotary hammer drill instead. Still, you can mimic the rotary part by twisting the hammer drill while drilling or lifting it out and turning it every so often so the bit does not get stuck in the hole. Use a shop vac as well to suck the dust out while drilling.

4. Obvious tip but mark with a piece a tape 1 7/8" on your drill bit for consistent hole depth.

5. You may need a larger (more leverage) 5mm Allen key than provided to screw in the anchors.

Were these instructions helpful? 
 

Difficulty

Est. Repair Time

1 to 2 hrs

Tools Needed

None

2     0

New pool needed safety cover

Written on 3/12/2017 by Guest

Contractors installed the cover I purchased. Pool Co. wanted to charge me $2000 for the cover plus installation. I bought the same cover from INYO for $600 and paid the contractor $200 to install.

Were these instructions helpful? 
 

Top

Review Summary

 (Average 4  out of 5 stars)
1 Ratings
5 star:
 
(0)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews