By Speck Pumps


Details

Top

Part # 2092136025

Manufacturer Code IG124-1100M-000+C00

Alternate Part #'s IG121-1100M-000, IG124-1100M-000+C00, S90-II

Product Description

 

Swimming Pool Pump - 1 HP Up Rate

The Speck Model S90 medium head pump has been engineered for durability and quiet performance. All models are equipped with 2" suction and 1.5"/2" discharge, ensuring optimum efficiency. The Model S90 uses 100% recyclable "environment" friendly plastics. Speck's high quality continues in the Model S90 with positive advances to benefit the consumer and the environment.

Features:

  • This high performance, medium head pump comes complete with our unique mechanical shaft seal that allows the pump, if mistreated, to run dry for up to one hour.
  • The pump can be used for pool water with a salt concentration of up to 5000 ppm. (For a higher concentration please call)
  • Pump parts are made of 100% recyclable plastic. Non-corrosive, chemical/UV resistant, and can withstand temperatures of up to 175° F.
  • All models are equipped with quick disconnect unions for easy installation and maintenance.
  • For pool users' safety, the impeller has a dielectric shaft sleeve that provides absolute separation between the pool water and electric parts.
  • Heavy duty "1081" pool motor with large 56 frame is thermally protected, has a PSC switchless design and extra large sealed ball bearings.
  • Specially constructed clear lid with ring lock design is easy to open. Large strainer basket is always locked in place.
  • Available with E-plus ® /extreme-E? energy efficient motors for extra low energy consumption.
  • Motor is easy to remove without disturbing the plumbing. Reusable o-rings throughout.
  • Three/Two year warranty on the motor and all pump parts, including normal wear of the mechanical seal.
  • Every pump is performance tested before leaving the Speck factory.

 


Speck

 

Speck

Product Specifications

HP:
1 HP
Speed:
Single
Max Pool Size:
2 gal.
Union Connectors:
Included
Weight:
35 lbs.
Service Factor:
1.0
Volts:
115/230 V
Port Size:
2 in.
Top

?     Asked on 6/23/2017by CG

I currently have a 3/4 HP motor connected to a "Black and Gold Swimming Pool pump. I am looking for a replacement, but do want to upgrade to a 1 HP. This appears to be similar in size, are you familiar with my current pump? If so, is this Speck pump comparable?
 Reply

A  Answered on 6/27/2017 by InyoPools Product Specialist Lennox H.

Hi, CG. The black and gold pump is a Hayward Super Pump. This Speck S90-II Pump 1HP can be used as a upgrade if you system can hamdle the additional water flow.
 Reply


?     Asked on 1/30/2018by Ruben

We have a Speck Badu S90 pump with a Century Pool & Spa A.O.Smith motor. Don't really know the part number, but I do see this is a 1HP, 1.0SF, 230/115 Volts and a "1081/1563" Pump Duty. Would the Speck S90 be an even swap or would the ES90-11 be okay?
 Reply

A  Answered on 1/31/2018 by InyoPools Product Specialist Lennox H.

Hi, Ruben. I would recommend sticking with this S90-II. Although the ES90-II will be an even swap plumbing wise, the performance will not. 
 Reply


?     Asked on 5/14/2021by Brandon

What would be a nice cheaper alternative to this Pump?
 Reply

A  Answered on 5/14/2021 by InyoPools Product Specialist Patrick P.

I would suggest the Waterway 1 HP Champion Pool Pump as an alternative.
 Reply