Model # P17007DE
|Pool Solutions Stabilizer
|Stabilizer keeps chlorine in your swimming pool longer, prolonging the life of chlorine. Pool Solutions Stabilizer helps reduce the loss of chlorine due to direct sunlight by as much as 25%.
|Desired CYA increase|| Amount of Stabilizer needed to increase Cyanuric Acid
Pool volume in gallons
|10 ppm||1 1/4 oz.||6 1/2 oz.||12 3/4 oz.||1 1/4 lbs.||1 2/3 lbs.||2 lbs.||4 lbs.|
|20 ppm||2 1/2 oz.||12 3/4 oz.||1 3/4 lbs.||2 1/2 lbs.||3 1/3 lbs.||4 lbs.||8 1/3 lbs.|
|30 ppm||2 1/2 oz.||11 oz.||1 1/3 lbs.||2 lbs.||2 2/3 lbs.||3 1/3 lbs.||12 1/2 lbs.|
|40 ppm||3 oz.||10 oz.||1 1/4 lbs.||2 lbs.||2 1/2 lbs.||3 1/4 lbs.||16 2/3 lbs.|
|50 ppm||6 1/2 oz.||2 lbs.||5 1/4 lbs.||6 1/4 lbs.||8 1/3 lbs.||10 1/2 lbs.||21 lbs.|
*Product should be added to a bucket of water and mixed. Once product has begun to pre-dissolve, slowly pour it along the perimeter of the swimming pool. The filter and pump should be running anytime chemicals are added to the swimming pool.
For More Pool Chemicals
How long after adding the stabilizer, should we wait to swim?
Hi, April. You will have to wait 3-4 hours before going into the pool.
how do u reduce cyanuric acid in pool water
Hi. Howard. The most effective way to reduce the Cyanuric Acid in a pool is to partially drain it. They are some products that can reduce the CYA in a pool but unsure of their effectiveness.
the cyanuric acid level is always reading very high in my pool. What are the consequences of a high reading?
Joseph, The first issue would be the efficacy (effectiveness) of the chlorine to act as a disinfectant. Higher levels will bind with the chlorine, making it slower acting to kill bacteria and micro-organisms, and prevent algae. Higher levels will also increase cloudiness in the pool water. At this point, it would be recommended that a portion of the pool water be replaced with fresh water, as there are no other means of reducing the cyanuric acid in pool water.
If I'm not getting a Cyanuric Acid reading with my test, does that mean there is no conditioner in the pool?
Things such as temperature, pH, alkalinity and calcium can cause false readings. Your best gauge for determining whether you have sufficient Cyanuric Acid levels is whether or not your pool is holding proper chlorine levels.
My chlorine always seems to be low no matter when I test it. What can cause this?
I would recommend checking the Cyanuric acid levels and adjusting if necessary. Cyanuric acid (conditioner) protects the chlorine from being burnt out by the sun.
Each year when I open my pool, the chlorine demand is very high. This year I needed 41 lbs of shock. The water is balanced when the pool is closed and is covered the whole off season. I do not have any contaminants entering the pool. Can you give me any ideas?
Without a full water analysis and more information about the swimming pool, it is difficult to diagnose. The swimming pool should be shocked at least once every 7-10 days. You would likely be using 1 bag per 10,000 gallons of pool water. Aside from that I would recommend checking the cyanuric acid level as an imbalance can cause the swimming pool to use more chlorine.