By Nidec Motor Corporation (formerly Emerson Motors)


Details

Top

Part # EB2979T

Alternate Part #'s B2979T, B979T, EMR-60-6090

Product Description

The 2EZ Speed motor and  timer is an easy-to-install two speed pool pump motor with an integrated programmable timer, designed to achieve maximum energy efficiency and utility dollar savings. 

Energy Efficient
Increased demand on the power grid, rising energy costs and environmental concerns have prompted  many states to enact legislation requiring the use  of energy efficient motors.  The timer mounted on the 2EZ Speed motor makes  it easy to program operating times and flow rates for  maximum energy savings. The 2EZ Speed motor can  be programmed to run on high at 3450 RPM or low  at 1725 RPM; and at different times and speeds for
weekdays and weekends.  Running the 2EZ Speed motor on low speed  optimizes pool energy savings while maintaining  the manufacturer’s suggested daily water flow  to properly filter the pool.

Easy to Program
The 2EZ Speed motor is factory programmed  to be a drop-in replacement for a standard single  or two-speed pool pump motor with only minor  programming required. Just set the time and day  of the week and the motor is set to operate. It’s  easy to customize speed settings for maximum  energy savings. Simply program on and off times  for low and high speeds. Operating the 2EZ Speed  motor on low speed saves the most utility dollars.

2 Ez digital controller

Freeze Sensor
The 2EZ Speed motor includes a freeze sensor  mounted inside the control. If the control is enabled  (on), the sensor will detect temperatures below  40 degrees Fahrenheit and run the motor on low  speed 30 minutes on and 30 minutes off until the  temperature rises above 40 degrees F.

Features: 

  • Triple Bearing Protection
  • 1081 Design
  • Continuous Duty
  • Class B Insulated
  • Open Drip-Proof
  • Sealed Ball Bearings
  • Switchless Design
  • 300 Series Stainless Steel Shaft
  • Thermally Protected
  • 6.5" Diameter Frame
  • Fully Integrated Motor Control
  • Program for Low & High Speeds
  • Two Settings – Mon-Fri and Sat/Sun
  • High/Low Speed Override
  • Freeze Sensor
  • California Title 20/24 Compliant

Product Specifications

HP:
2.0/.25 HP
Speed:
Dual
RPM:
3450/1750 RPM
Amps:
10.0/2.1 amp
Service Factor:
1.2
Frame:
56J
Stock #:
EB2979T
Flange:
Round
Length Less Shaft:
12.52 in.
Timer:
Digital
Volts:
230 V
Top

?     Asked on 7/10/2015by Inyo Visitor

How much wattage does this motor use?
 Reply

A  Answered on 7/10/2015 by InyoPools Product Specialist Patrick P.

On the high speed this motor uses 2300 watts and on the low speed it uses 483 watts.
 Reply


Top

Review Summary

 (Average 4.5  out of 5 stars)
2 Rating
5 star:
 
(1)
4 star:
 
(1)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews