LED Pool Bulb Color Changing 120V 18W - PL5814

$119.99

IN STOCK
FREE SHIPPING

Part # PL5814

By PureLine

  5 Average  

Details

Top

Part # PL5814

Warranty 2 Year Warranty

Dimensions 6-5/8" x 5-1/4"

Product Description



REPLACEMENT COLOR CHANGING LED POOL & SPA LIGHTS

PureColors replacement LED pool & spa bulbs offer seven solid colors, and nine light shows that can instantly transform your pool area into a color-rich paradise. The PureColors bulb uses an Edison screw in base, so they install easily into your existing fixture in just minutes. Plus, LED technology makes them the most energy efficient and longest lasting bulb on the market.

ADVANTAGES:

  • LED technology
  • 80% Operational Cost Savings
  • Standard screw in light base for quick & easy replacement
  • Synchronize multiple lights to operate in unison
  • 50,000 hours Lifespan
  • 2-year warranty
  • 252- LED's 

COMPATIBILITY:

  • Hayward Astrolite SP0580 Series
  • Hayward DuraLite SP0570 Series
  • Pentair Amerlite 784 Series
  • Note: Not compatible with Swimquip Light Fixtures or Hayward SP0540 series.

Product Specifications

Color:
Color Changing
Pool / Spa Type:
Pool
Volts:
120 V
Watts:
18 W
Controller:
Light Switch
Lumens:
White: 1,600 Colors: 600
Incandescent Equivalent:
200 Watt
Top

?     Asked on 7/19/2019 by David Faxon

Will this bulb work in a Hayward SP-580A fixture? Was unable to find this model in previous questions, thanks.
 Reply

A  Answered on 7/19/2019 by InyoPools Product Specialist Hector F.

Yes, this bulb would be compatible with your SP580 series pool light as long as you do indeed have 120 volts. 
 Reply


?     Asked on 7/16/2019 by Adam Shirley

Will these bulbs work with an old Anthony #30 light fixture?
 Reply

A  Answered on 7/16/2019 by InyoPools Product Specialist Lennox H.

Hi, Adam. These bulbs will NOT fit an Anthony Model #30 light fixture. We do not have an LED bulb that will fit. 
 Reply


?     Asked on 6/7/2019 by

I need to replace my incandescent bulb and was thinking about upgrading to the LED color changing bulb. Will this work with a dimmer switch or will I need to install a regular switch?
 Reply

A  Answered on 6/7/2019 by InyoPools Product Specialist Hector F.

You would need to use a standard light switch/on/off circuit for this bulb. 
 Reply


?     Asked on 6/6/2019 by Graig

Will this work with my Hayward sp-583-L? And if so what gasket will i need?
 Reply

A  Answered on 6/6/2019 by InyoPools Product Specialist Lennox H.

Hi, Graig. Yes, this bulb is compatible with SP-583-L fixture. You will also need the Astrolite Lens Gasket - SPX0580Z2.
 Reply


?     Asked on 5/27/2019 by Don Emerson

Hi, I have a Pentair 600015 color changing pool light and need to replace the light and gasket. Can you tell me if this bulb will work? Thanks...
 Reply

A  Answered on 5/27/2019 by InyoPools Product Specialist Patrick P.

Hi Don, This bulb does not work as a replacement for the Pentair 600015 Sam Light. You may view the replacement parts and replacement bulb by clicking on this link here - Pentair SAM Light Replacement Parts 600015
 Reply


?     Asked on 4/3/2019 by Adrienne

Hello - we have two Hayward Color logic Fixtures, SPO523SLED30. Both have now stopped working. Would this light work with my system or do I have to replace the entire fixture? Thank you!
 Reply

A  Answered on 4/3/2019 by InyoPools Product Specialist Lennox H.

Hi, Adrienne.  You will have to replace the entire fixture. You can use the Hayward Astrolite Fixture with this LED bulb. 
 Reply


?     Asked on 9/5/2018 by Tim

So if my light is on a timer, everytime the light comes on it is going to change to the next program setting?
 Reply

A  Answered on 9/5/2018 by InyoPools Product Specialist Lennox H.

Hi, Tim. The bulb will only change color if it's switched off/on with 2 seconds. 
 Reply


?     Asked on 8/22/2018 by daniel armendariz

will this bulb fit a hayward AstroLite 120V, 500W, 30' Cord with Stainless Steel Face Ring Pool Lights Sku: SP0583SL30
 Reply

A  Answered on 8/23/2018 by InyoPools Product Specialist Lennox H.

Hi, Daniel. Yes, this bulb is compatible with your model SP0583SL30 fixture. You will also need to replace the Astrolite Lens Gasket - SPX0580Z2
 Reply


?     Asked on 8/19/2018 by Don

I have Hayward SP607 light niche with a SP583-30 500W Hayward light with a 30’ cord. What would be a good LED multi color replacement bulb?
 Reply

A  Answered on 8/21/2018 by InyoPools Product Specialist Lennox H.

Hi, Don. You can use this PL5814 - 18W, the PL5809 - 35W or the LPL-P2-RGB-120 - ColorSplash LXG bulb with your model fixture. You will also need to replace the Astrolite Lens Gasket - SPX0580Z2
 Reply


?     Asked on 8/1/2018 by Lynda

I have a Underwriters Laboratory inc. wet niche type No. A753024. Model #100. Forming shell#429 120V. 400W. Lamp G30. Purex pool products division . I would like to order a LED bulb (standard fitting) so I can have a color light show , can you please advise me as to what bulb I should get. My pool is 20x40. Thanks lynda
 Reply

A  Answered on 8/1/2018 by InyoPools Product Specialist Lennox H.

Hi, Lynda. Unfortunately, this LED bulb is not compatible with your Purex fixture. You will have to replace your old fixture with a current replacement. Replacement options will be the PureColors LED
 Reply


?     Asked on 7/30/2018 by Jim

I have a 30,000 gallon inground with a single light in the deep end. The current light assembly is a PAC-FAB Series One with an R-40 bulb. Can you recommend a multi-color LED replacement bulb that will work well with this configuration?
 Reply

A  Answered on 8/4/2018 by InyoPools Product Specialist Lennox H.

Hi, Jim. Unfortunately, there is not an LED bulb that is compatible with a Pac-Fab series fixture. You will have to replace the entire fixture using the PureColors LED Fixture Kits.  
 Reply


?     Asked on 7/18/2018 by Jon

I have a Hayward SP0583L50 Fixture and am looking for a blue colored replacement bulb (current bulb is HALCO white/clear 500W/120V). What are my options. Thank you!
 Reply

A  Answered on 7/18/2018 by InyoPools Product Specialist Lennox H.

Hi, Jon. This LED bulb does have a Blue color that it can be set too. You can also use the Light Blue Lens Cover - SP0580LLB using the white bulb. 
 Reply


?     Asked on 7/17/2018 by Chris Myers

I have a Jandy WaterColors 120V LED that has stopped working. My pool is 10,000 gallons, 24 ft by 12 ft. with a 3ft shallow end to a 5ft deep end. I have 2 questions; 1, how do I check to determine if the Light Engine is bad or the whole unit is bad? It's 6 years old. 2, if it is just the Light engine that's bad, are there compatible replacements that are not Jandy?
 Reply

A  Answered on 7/18/2018 by InyoPools Product Specialist Lennox H.

Hi, Chris. You can use our Tips for Troubleshooting Your Pool Light Blog. They're no aftermarket replacement for the light engine.
 Reply


?     Asked on 7/16/2018 by Pete Merchant

need a replacement for a 500w bulb with an LED bulb, what would be compatible n the cost please?
 Reply

A  Answered on 7/16/2018 by InyoPools Product Specialist Lennox H.

Hi, Pete. In order to deermine compatibility, you will need to provide us with the model of the fixture. 
 Reply


?     Asked on 7/9/2018 by

Will PL5814 replace my 500W, 120V, R40 flood? Some of the numbers I found: Jandy PLN1/CLRG. Pentair 62004 Series WPHV500ws250 p/N R4505040
 Reply

A  Answered on 7/9/2018 by InyoPools Product Specialist Lennox H.

Hi. The Pureline Bulbs are not compatible with the WPHV500WS250 model fixtures. However, the ColorSplash LXG LED Pool Lamp 120V - LPL-P2-RGB-120 and the Silicone Lens Gasket - R0451100 are. 
 Reply


?     Asked on 5/28/2018 by

Can you tell me what bulb and light will work on a Purex fixture from the 80’s?
 Reply

A  Answered on 5/29/2018 by InyoPools Product Specialist Patrick P.

Hi, If you are looking to replace the complete light fixture with cord then the PureColors Color Changing Light Fixture would replace your Pac Fab Light.
 Reply


?     Asked on 5/26/2018 by Wiley

I currently have a 120V/100W bulb in my 6' foot spa. Would this bulb be the compatible replacement regarding brightness? Also would the 120V/35W be the correct one for a single light 15x30 pool?
 Reply

A  Answered on 5/26/2018 by InyoPools Product Specialist Patrick P.

Hi Wiley, Normally the spa light is smaller in diameter than your pool light. If your spa light measures roughly 6" diameter then you would need the PureColors 120V Spa Bulb and if your pool light measures roughly 10" in diameter then you will need the PL5809 PureColors 120V Pool LED Bulb
 Reply


?     Asked on 5/23/2018 by Jim

Will this light work with Hayward Dura Niche # sp0600h?
 Reply

A  Answered on 5/23/2018 by InyoPools Product Specialist Patrick P.

Hi Jim, The SP0600 is the part # for the niche or light can that is embedded into the wall of the pool. If you already have the light fixture that goes into that can/niche and it is 120V then yes this bulb will work in your light fixture as long as your current bulb has a standard screw-in Edison base. If you are needing the complete light fixture with cord and bulb that goes into the SP0600 niche then you will need one these PureLine Pool Light Fixtures.
 Reply


?     Asked on 5/16/2018 by nick

I need to replace 2 American Products lamps. THe series markings are 7885xxx,7845xx and 7895xx with the watts 500, volts 120 and bulb type r-40. Says to use with model no 7821xx, 7822xx 7823xx 79296799 or 79208900 fixture houseing wet niche type I want to use LED technology. What bulb and gasket do I order from you to make this work?
 Reply

A  Answered on 5/16/2018 by InyoPools Product Specialist Patrick P.

Hi Nick, Thanks for supplying those model #'s as that really helps. For your light, we would suggest the PureColors PL5809 120V LED Replacement Bulb or the PL5859 PureColors v2 120V LED Replacement Bulb both would work great.
 Reply


?     Asked on 4/28/2018 by Al

My 18000 gallon pool has a light on both ends. Do you recommend two 35w watt bulbs or two 18 watt bulbs?
 Reply

A  Answered on 4/29/2018 by InyoPools Product Specialist Lennox H.

Hi, Al. It depends on the pool size and the current light wattage. I would recommend one 18 and one 35 watt bulb. 
 Reply


?     Asked on 4/8/2018 by Mark F.

I have a hayward color logic led lighting fixture in my pool. The light no longer works properly. It will come on for a few minutes and then die out. It is a SP0524 or SP0525 . It is 12 V - 50 watts Can I replace this with a color changing bulb system?
 Reply

A  Answered on 4/9/2018 by InyoPools Product Specialist Lennox H.

Hi, Mark F. Unfortunately, you cannot. You will have to replace the entire light fixture. 
 Reply


?     Asked on 2/10/2018 by Larry

My pool, built in 1990, has one pool light and one spa light, both 10 inch niches, 500 watt and 300 watt respectively. The fixtures were replaced with Pentair Amerlite units 5 years ago. In reviewing the Pureline product specs, I don't see a 500 watt equivalent in the color changing LED bulbs. Would the 35 watt and 18 watt equivalent sizes be suitable replacements and are they synchronizable with the different wattages? Thank you.
 Reply

A  Answered on 2/12/2018 by InyoPools Product Specialist Lennox H.

Hi, Larry. There is not a LED color changing fixture that will be equivalent to 500 watts. The 35 and 18 watts LED bulbs can be used as a replacement and will sync if they're on the same circuit. 
 Reply


?     Asked on 1/10/2018 by Roger

Will the PL5814 bulb work with a Haywood SP0570N50 100W 12V light? Thank you!
 Reply

A  Answered on 1/10/2018 by InyoPools Product Specialist Lennox H.

Hi, Roger. Yes, this LED bulb will work in the Hayward DuraLite Fixture - SP0570N50. You will also need to replace the Lens Gasket - SPX540Z2
 Reply


?     Asked on 11/25/2017 by Kevin

I have a Hayward light in an in-ground pool, it has a 120volt 300watt now. can I replace just the bulb to get a changing light display LED?
 Reply

A  Answered on 11/28/2017 by InyoPools Product Specialist Hector F.

These LED bulbs are compatible with the Hayward Astrolite series pool and spa lights. You would need to check the model of your light which should be located on the light label or if are not sure then you can email us images of the light face to upload@inyopools.com so we can assist in identifying the model. 
 Reply


?     Asked on 10/7/2017 by FRANK

I have a Underwriters Laboratories Inc. in ground pool light No. R-491823,label on it Fix MOD SP-583L use with fixturehousing model NO SP-600, SP-607 WATTS 500 VOLTS 120 BULB TYPE R-40. Will an LED replacement bulb work in this fixture? I also need a new seal. What seal should work for this fixture? Thanks for the help!
 Reply

A  Answered on 10/9/2017 by InyoPools Product Specialist Lennox H.

Hi, Frank. You can use either the PL5814 or the PL5809 LED bulb along with the Hayward Astrolite Lens Gasket - SPX0580Z2
 Reply


?     Asked on 9/18/2017 by David

Can the LED color changing lights be on a dimmer switch?
 Reply

A  Answered on 9/18/2017 by InyoPools Product Specialist Lennox H.

Hi, David. This bulb cannot be controlled using a dimmer switch. 
 Reply


?     Asked on 8/2/2017 by Mark T

I have a 400W -120V Bulb in a Hayward fixture will this LED light work for me? It's a 9' dining pool.
 Reply

A  Answered on 8/2/2017 by InyoPools Product Specialist Alex V.

Mark, If you have a Hayward Astrolite or Duralite, this bulb will fit. If you do not have either of these models, please call us and provide us with your model number. 
 Reply


?     Asked on 7/20/2017 by Mike

I have a pentair fixture with a label #619562. Is that a 120v fixture?
 Reply

A  Answered on 7/21/2017 by InyoPools Product Specialist Lennox H.

Hi, Mike. I will need the fixture series or model number, I can't use the label number to confirm if this bulb will work. This bulb is only compatible with the Pentair Amerlite 784 Series fixture. 
 Reply


?     Asked on 7/8/2017 by John

Yes, do you have any candelabra bulbs for a pentair pool light?
 Reply

A  Answered on 7/11/2017 by InyoPools Product Specialist Joe S.

Good day, at this time there are no LED bulbs that will have a candelabra base. 
 Reply


?     Asked on 7/8/2017 by John

Yes, do you have any candelabra bulbs for a pentair pool light?
 Reply

A  Answered on 7/10/2017 by InyoPools Product Specialist Joe S.

At this time there are no LED's that will fit in a Candelabra based unit. 
 Reply


?     Asked on 6/26/2017 by STEPHANIE L NOWAK

We have a in ground pool -- 18K gallons. Light just went out and need to replace- we had an LED color changer, by switch,. I don't know what the housing is, with out taking out the whole light fixture. Would like to have the new gasket and light on hand before I start to pull out light. Are all the lights standard size? I know I am a 120 v. ???
 Reply

A  Answered on 6/26/2017 by InyoPools Product Specialist Alex V.

Stephanie, In order to confirm if this bulb will fit, we will need to know the model number of your fixture. 
 Reply


?     Asked on 6/21/2017 by Steve

Can these bulbs be tested while the pool is empty, or do they need to be submerged so they will not blow out like traditional poool light bulbs.
 Reply

A  Answered on 6/21/2017 by InyoPools Product Specialist Hector F.

Yes, you can test these while a pool is empty but would not recommend testing them over a long period of time. 5 to 10 minutes should be plenty to run the tests.
 Reply


?     Asked on 6/19/2017 by Bob Kretz

I have a Underwriters Laboratories Inc. in ground pool light No. S-216195. Will an LED replacement bulb work in this fixture? I also need a new seal. What seal should work for this fixture? Thanks for the help!
 Reply

A  Answered on 6/20/2017 by InyoPools Product Specialist Patrick P.

Hi Bob, could you take a few photos of your light including a photo of the label near where the cord attaches to the back of the light housing. You can simply reply to this email with those photos or you can email them to upload@inyopools.com the photos will help us determine the proper replacement bulb for you.
 Reply


?     Asked on 6/12/2017 by william fawzy

IS THE GAQSKET INCLUDED
 Reply

A  Answered on 6/12/2017 by InyoPools Product Specialist Hector F.

No, the gaskets are not included. Those gaskets are dependant on the model of the light fixture itself. You can call in with that information or if you are not sure you can send a few images of the light itself to upload@inyopools.com to assist in identifying it. Please keep in mind that these bulbs are compatible with the Pentair Amerlite, Hayward Astrolite, and the Jacuzzi Full Moon.
 Reply


?     Asked on 5/27/2017 by david from scottsdale

How easy is it to replace the bulb if it is under water ? do I drain the pool to below the bulb ? what are the steps in REPLACING OLD BULBS WITH YOUR NEW LED.... ALSO what do you do when there are NO BULBS in the pool and I want to add lighting ? are there specialists for this or an ordinary electrician will do...? thank you David
 Reply

A  Answered on 5/27/2017 by InyoPools Product Specialist Patrick P.

Hi David, Replacing a light bulb in a swimming pool is relatively easy and you don't need to drain the pool water. Here is a Video on How to Replace a Pool Bulb which outlines this process step by step.
 Reply


?     Asked on 5/24/2017 by Kevin

I have an American Products 400 watt, 120 volts, bulb type R-40, will the color changing LED bulb work? What gasket should I get? Pool is 22' x 11' will the 18 watt be bright enough?
 Reply

A  Answered on 5/24/2017 by InyoPools Product Specialist Patrick P.

Hi Kevin, The PureColors LED Bulb will work on your American Product Light however I would suggest the 120V 35W PureColors LED Bulb and you would need this American Products Light Gasket
 Reply


?     Asked on 5/22/2017 by

Looking to switch to the LED bulb. Current niche housing is by American Products with the label of series 7884XX, 7844XX,7894XX 400 watts, 120 volts, bulb type R-40. Would this LED replacement work and what gasket would be needed. Lastly, pool is 22'x11' is the 18 watt sufficient for brightness?
 Reply

A  Answered on 5/25/2017 by InyoPools Product Specialist Lennox H.

Hi. The PL5814 LED bulb is compatible with your American Products Fixture. You can you the Guardian - LPL-G-P, OEM - 79101600 or Generic - 791016 lens gasket.
 Reply


?     Asked on 4/12/2017 by Bobby

I have a pentair amerilite 500watt 120 volt pool light clear bulb,what led color light you have that you have that allows me to change out with this bulb.
 Reply

A  Answered on 4/12/2017 by InyoPools Product Specialist Patrick P.

Hi Bobby, The PL5809 120V 35W PureColors LED Bulb would be the replacement bulb I would suggest. This bulb will fit into the Pentair Amerlite.
 Reply


?     Asked on 10/18/2016 by doreen johnson

Hi you answered my ? about which bulb was best, but in the meantime, I read the previous questions and because we have a 42ft pool, I ordered the 38 watt instead of the 18 watt. Is this OK?
 Reply

A  Answered on 10/18/2016 by InyoPools Product Specialist Alan M.

The 38 watt is the brighter of the two. This would be the better option.
 Reply


?     Asked on 10/18/2016 by doree johnson

Hi our burned out light is 300w 120volt GE reflector flood light. I want to replace it with a color bulb. Which one. the 120v 18 watts is throwing me off. Thank you
 Reply

A  Answered on 10/18/2016 by InyoPools Product Specialist Megan C.

The LED Pool Bulb Color Changing 120V 18W - PL5814 has 252 LED's and the LED Pool Bulb Color Changing 120V 35W - PL5809 has 441 LED's. The more LED's the brighter the illumination of the light. Please ensure that you replace the lens gasket and verify the compatibility of the replacement bulb with your current fixture. COMPATIBILITY:Hayward Astrolite SP058 SeriesPentair Amerlite 784 SeriesNote: Not compatible with Swimquip Light Fixtures or Hayward SP0540 series.
 Reply


?     Asked on 9/26/2016 by Christopher

This says "Pool" next to "Pool/Spa Type". Is it not compatible with spas? I currently have a American Products CN-5 R-500 in my spa and would like to replace it with a color-changing LED light. Also any tips for loosening a stuck pool light screw?
 Reply

A  Answered on 9/28/2016 by InyoPools Product Specialist Megan C.

The American Products CN-5 R-500 references to the Pentair Amerliter 120V / 500W. This light is normally installed in pools. If you have this model, you may install the PL5814 or the PL5809 with the use of the Guardian Silicone Lens Extra Heavy Duty Gasket for Pentair Amerlite - LPL-G-P. You may try to use vice grips or locking pliers to get a better grip on the screw.
 Reply


?     Asked on 9/5/2016 by Carl

Looking to replace my current jandy 120volt 500w bulb with a compatible led Bulb. The part number of my bulb is R0450504. Which if any led bulbs that you sell would work?
 Reply

A  Answered on 9/21/2016 by InyoPools Product Specialist Stacey M.

Hello Carl, there is a Bulb, 120v 500w Flood (r40fl500/hg) which is not an LED, depending on what pool light housing you have there is LED replacement that only works for Hayward astrolite and Pentair amerilite.
 Reply


?     Asked on 9/3/2016 by susan

Will this bulb work in American Products Model CN-5, R-500 BC R-40 bulb type, 120 Volt 500 Watts unit. Label 987012, No. M502243, label 98700600? Thank you!
 Reply

A  Answered on 9/14/2016 by InyoPools Product Specialist Lennox H.

Hi Susan, Yes. This bulb can be used with your light fixture. You will also need to replace the lens gasket which you can use the OEM Lens Gasket (79101600) or the Guardian Silicone Lens Gasket (LPL-G-P).
 Reply


?     Asked on 8/31/2016 by Dave Wright

Looking for Carvin replacement Color Led 120 volt bulb for Pool light.
 Reply

A  Answered on 8/31/2016 by InyoPools Product Specialist Scott W.

If what you currently have is a Jacuzzi Full Moon than that pureline will fit that light fixture. If that isn't what you have, if you want to provide which model Jacuzzi you have and I can help you find the correct light for your fixture.
 Reply


?     Asked on 7/12/2016 by Rajiv bajaj

I am currently using r40 light bulb I think it is 400w 120v what LED bulb I could use
 Reply

A  Answered on 7/14/2016 by InyoPools Product Specialist Joe S.

Good day, this light bulb will only have the COMPATIBILITY:Hayward Astrolite SP058 Series Pentair Amerlite 784 Series Note: Not compatible with Swimquip Light Fixtures or Hayward SP0540 series.
 Reply


?     Asked on 7/11/2016 by John

Hi...I have an 8000 gallon pool with Pebbletec. Do I need a 3g bulb or will a 2g do the job? I don't want to overkill the lighting. Also, will this fit a PacFab 60x11x 100 watt light? Many thanks.
 Reply

A  Answered on 7/17/2016 by InyoPools Product Specialist Lennox H.

Hi John, For a pool your size the 2G bulb will do. However, this bulb is might not be compatible with a PacFab fixture since it's an older fixture.A 100 watt bulb is also used in spa light fixture not pool light. If you can send photos of the fixture we can confirm.
 Reply


?     Asked on 5/9/2016 by John

I believe I have an amerilite pool light bur how would I know for sure? Also how would I know if it's 12V or 120V? Thanks You!
 Reply

A  Answered on 5/10/2016 by InyoPools Product Specialist Patrick P.

The best bet would be to remove the light fixture from the niche in the wall of the pool. To do this you will turn off the breaker to the light then get in the swimming pool and remove the pilot screw at the top of the light face ring. This will then free the light from the wall of the pool and you can bring the light fixture up onto your deck. There should be a label on the light housing which will give you the manufacture and model # of your light. If this information has worn off then you can check your dimensions against the Pentair Amerilite Dimensions or the Hayward Astrolite Dimensions and if they match up then this bulb will fit. The voltage information should be on the light housing but if it has worn off then you can remove the bulb from inside the light fixture and the voltage information should be right on the light bulb.
 Reply


?     Asked on 4/27/2016 by

Can these lights be used to cycle colors when used on a timer and if you can when the timer goes off and turns back on will it be the color you had it on previously or will it change.
 Reply

A  Answered on 4/27/2016 by InyoPools Product Specialist Patrick P.

Yes the Pure Colors Bulb can be used to cycle colors with a timer and it does have memory so if the light is turned off for more than 20 seconds then the next time the light is turned on the light will remember the last color show it was on.
 Reply


?     Asked on 4/10/2016 by dennis

How long of a warranty/typical hrs b4 replacement
 Reply

A  Answered on 4/10/2016 by InyoPools Product Specialist Patrick P.

Hi Dennis, The PureLine Pure Colors LED Pool Bulb has a 2 year manufacture warranty and a 50,000 hour lamp life.
 Reply


?     Asked on 4/7/2016 by Lew

I see you have an 18 W and a 35 W LED in the 120V series.. So that I pick the correct LED replacement. What is the equivalent wattage to the incandescent / halogen bulb that I'd be replacing? If this helps, my pool is an inground 16x32 gradient from 8 ft to 3 ft ..Thanks
 Reply

A  Answered on 4/7/2016 by InyoPools Product Specialist Patrick P.

Hi Lew, For a 16' x 32' pool I would suggest the 35 Watt 120V Pure Colors LED Pool Bulb. The 35 Watt bulb is comparable to a 300 - 400 Watt Incandescent bulb.
 Reply


?     Asked on 4/7/2016 by Dane

What is the correct wattage for lighting equivelent to the existing 12V 300W bulb?
 Reply

A  Answered on 4/7/2016 by InyoPools Product Specialist Patrick P.

Hi Dane, I would suggest the 12V 35 Watt Pure Colors LED Pool Bulb as an equivalent  replacement to a 12V 300 Watt Bulb.
 Reply


?     Asked on 4/7/2016 by David

Can the light be stopped on one particular color? I tried downloading the owners manual and there seems to be a bad link
 Reply

A  Answered on 4/7/2016 by InyoPools Product Specialist Patrick P.

Yes the light can be stopped on a color there are 7 fixed colors white, red, green, blue, gold, cyan and violet. You would cycle to the fixed colors by flipping your pool light switch relatively quickly. In addition to the fixed colors there are 9 color shows..... Evening Sea (slow animation of blue and red), Evening rivers (slow animation of green and red), Riviera (slow animation of blue and green, Rainbow (slow animation of all colors), River of Colors (slow animation of all colors followed by Four Seasons), Disco (fast animation followed by Rainbow) and Party (Fast animation followed by River of Colors).
 Reply


?     Asked on 4/7/2016 by mark

is there a remote control to stop the changing colors or does it cycle the different colors constantly?
 Reply

A  Answered on 4/7/2016 by InyoPools Product Specialist Patrick P.

The light would be controlled through a standard light switch or your pool control system. Flipping your light switch on and off relatively quickly will cycle the light to the next color or next light show. There are 16 modes, 7 modes are fixed colors and 9 modes are rotating color shows.
 Reply


?     Asked on 4/6/2016 by

Can the light be changed without draining the pool?
 Reply

A  Answered on 4/7/2016 by InyoPools Product Specialist Patrick P.

Yes you can replace the bulb in your pool light with this LED bulb without needing to drain your pool water. You will first need to turn off power to the pool light at your breaker then go to the pool light and remove the pilot screw which is located on the face ring of your light. Once the pilot screw is removed this will allow you to bring your entire light fixture up on to your pool deck where you can then replace the bulb. The replacing of the bulb is as simple as unscrewing the old bulb and screwing in the new bulb. I would also suggest replacing your lights lens gasket when replacing the bulb, the two most popular would be the Hayward Astrolite Lens Gasket and the Pentair Amerlite Lens Gasket. We also have a great Video on How to Replace a Swimming Pool Light Bulb which will walk you through the process.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
1 Ratings
5 star:
 
(1)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)