Part # PL1508
Part # PL1508
Warranty 1 Year
Same Quality as Hayward, Pentair, Sta-Rite, Jandy, Jacuzzi & Waterway!
The PureLine Pure Pro XL pool pump is one of our favorite pumps. This work-horse is designed to be energy efficient, quiet, dependable and all of this at a great price. The Pure Pro XL is designed and manufactured according to all the requirements of CSA and ETL.
Pure Pro XL Salt Friendly
As salt pools become more popular we have built a pump specifically designed for the demanding water conditions of saltwater pools. The most common area of failure on pool pumps is caused by leaking from the shaft seal, o-rings and gaskets. Saltwater and Chlorine can be particularly harsh on these components.
Upgraded Corrosion-Resistant Material
The Pure Pro XL Salt Friendly uses an Upgraded Corrosion-Resistant Material called Viton for the shaft seal, o-rings and gaskets. This ensures that your pool pump will be running great for years to come so you can enjoy your crystal clear pool.
Great for Non-Saltwater Pools too!
The Pure Pro XL Salt Friendly is also great for Non-Saltwater pools. This pump is an excellent Heavy Duty Upgrade for Non-Saltwater pools and is our recommendation for all pools.
Salt Friendly Features:
Salt Friendly Benefits:
Click here for 1.5" Quick Disconnect Unions for the Pure Pro XL Pump
I have an above ground pool and I want to switch over to salt. My question is, is this pump all I need for the switch over or will I need something else to make it complete?
Hi, Dave. You will need to purchase a salt system and either use your existing pump or replace it with a Salt Friendly pump like this one if it's suitable for your pool.
I have a 23x 52 salt water pool and need a new pump. I have a 1hp now but have used a 3/4 HP in the past. Got a good deal on the 1hp, but it pushed sand in the pool from the filter. So, would this work for me? I have only used Hayward pumps in the past.
Hi Rob, Yes from a power standpoint this will work for you. You may have a little re-plumbing as the plumbing ports are not in the exact same location on the PureLine and the Hayward.
I have an 18' x 52" above ground pool. Right now I have an 1 hp pump. Would your 1.5 hp pump be okay to use or should I down grade to the 3/4 hp?
I have a 15 ft. above ground pool. 4' deep. I currently have a 1 hp pump and a 18" or 20" sand filter. My pump is making lots of noise and I am looking at a replacement. We went to salt last year and I was wondering since I have to replace my pump would it be beneficial to order a salt friendly pump like the one listed? Also is 3/4 hp enough for the pool that I have or do I need the full 1 hp? I didn't see a 1 hp salt friendly pump.
Hi Patrick, I would definitely suggest the salt friendly pump for your salt pool and the 3/4 HP would be more than adequate for a 15' round 48-inch pool.