Part # PL7713
Warranty One Year Warranty
This is the replacement Salt Cell for the PureLine Crystal Pure 3.0 (PL7703) Salt System manufactured from June, 2016 to present. This replacement salt cell is designed for pools up to 60,000 gallons.
Two new o-rings for the unions are included.
If I use this cell with a Hayward Aqua Rite system, will it still produce the 3.18 pounds of chlorine a day, since the Aqua Rite is only configured for up to 40,000 gallon pools, and this is for up to 60,000 gallon pools? If, how do I configure the Aqua Rite to do so?
Reply
These cells are not compatible with the Hayward saltwater systems.
Reply
Can I use this as a replacement cell for the PL 7700?
Reply
Yes you can use this as a replacement cell for the PL7700. You will just need to change the cell size within the settings of your power supply as shown here - Salt Cell Setting for Crystal Pure Salt System
Reply
Your attached instructions are how to change from metric reading to imperial. That does not seem at all to relate to changing from 40k to 60k capacity salt cell.
Reply
Hi Carl, Sorry those instructions are not the best but the chart on the final page shows that you need to go into your power supply and change the salt cell setting from F15 for the PL7700 to T15 for the PL7703 (PL7713) 60,000 gallon cell.
Reply
