Part # PL0714
Dimensions 14" x 7-7/8"
Alternate Part #'s 26-253-1025, 27515-154-000, 5535100 SEA, HAY06221, PCPTM-12-H8, PRTM12H8, SP071113, SP0714T, SP704, SP714T, SW711T, TM-12-H8
The PL0714 Valve is an After-Market Replacement Valve for the Hayward SP0714T Valve which is Commonly Used on Hayward Pro Series Sand Filters. This is not the original valve by Hayward but is an After-Market valve that fits the Hayward sand filters.
Is your backwash valve leaking?
Why spend 30% for the Hayward original when you can get an after-market valve at the same quality!
This is an after-market replacement top mount backwash valve which is a direct replacement for the Hayward SP0714T & SP711-13 valves as well as the Jacuzzi DVK7 valve.
The Hayward SP0714T & SP711-13 valves are commonly used on the following Hayward Pro Series Sand Filters: S166T, S180T, S210T, S220T, S244T & S270T.
The Jacuzzi DVK7 valve is commonly used on the following Jacuzzi Laser Sand Filters: 160L, 190L, 225L, 250L please note that the Jacuzzi Laser had two style valves a bolt on style and a clamp on style this is the clamp on style. The bolt on style valve is far more common and can be found here Jacuzzi Laser bolt on style valve
My Sand Filter is a Hayward S160T is the is the proper replacement valve the S160T filter?
Reply
No this is not the proper filter valve for the S160T. You may view the proper valves here >http://www.inyopools.com/pool_parts_hayward_s_160t_filter.aspx The 4707-0 is the Hayward Original valve and the 4707P is the generic replacement which will work as well.
Reply
How do I bleed air for a top mounted Hayward multiport valve? They have no air bleeder valve.
Reply
Hayward TOP mounted multiport valves do not require an air bleeder valve. They self purge air in the system through the return lines.
Reply
I have a Hayward S-180T model sand filter and my owner's manual states that a SP-711-13 is the proper vari-flo control valve. I do not see this item listed anymore. What do I replace it with?
Reply
The SP711-13 which was used on the Hayward S180T has been replaced by the SP0714T listed here on this page.
Reply
Less than 1 hr
Screwdriver, Adjustable Wrench
1. Got model number off Haywood multiport valve
2 did internet research for a replacement
3 shopped local first but they were too expensive
4 Called Inyopools
5. They were able to supply a direct replace at half the cost
6 Ordered
7 Received complete new valve assembly in 4 days
8 Remived the broken valve and then installed replacement in about one hour (I have a noons installed in all water lines making this task easy)
9 Started filter system back up
Less than 1 hr
Screwdriver
2 0
Tried to find brand and number on valve, but too old. Tried several companies without success. Friend recommended DIY. Called and described filter, was told
what part and was set out fast. Love doing business with them.
Less than 1 hr
Screwdriver
3 1
Looked at repairing the valve, but INYO had a replacement valve for nearly the same cost as the repair item. Easily decided to replace the valve. Valve was delivered in timely manner, came as advertised and fit without a problem. Simple and quick replacement.
Less than 1 hr
Screwdriver, Pliers
2 0
I received my Top Mount Valve but before I placed the order I ask the representative if the Top Mount Valve came with the mounting clamp and she assured me that it did, so I ordered it. Come to find out, when I opened the box no clamp or pressure gauge so gave a phone call and they took care of the missing parts.
Once I received all the parts I released the pressure from sand filter unplugged all power and dismounted the Top Mount Valve unscrewed the fittings from old valve (since they were in great condition) and screwed them on to the new valve but add some Teflon tape to all 3 parts for better tightening (just hand tight )
I then wrapped the pressure gauge with Teflon tape and also hand tighten, connected all hoses to the proper outlets and turned on the power and Wala pool is up and going thanks Inyopools for coming through for me. I’d recommend your service to anyone who may want or asked for great replacement parts; Francisco Martinez 👍
Less than 1 hr
Screwdriver
1 0
Turn off pool pump. Turn valve handle to close. Disconnect hoses to and from valve and place inside pool so not to lose water. Remove valve collar and pull out leaky valve. Replace with new valve and tighten collar braces. Reconnect hoses and turn on pump.
Less than 1 hr
Screwdriver, Adjustable Wrench, Pipe wrench (for PVC connectors)
2 0
Very easy to install. The information included walked me thru it step-by-step beginning with removal of the old valve, the PVC pipes for incoming and outgoing water.
Also ordered a new flange and o-ring so all were new. Installed as per the instructions and diagram, added teflon tape to all the threads (as explained in the instructions) and reinstalled the flange and tightened all screws (hand-tightened).
Ran a test on the filter and had to make some small adjustments to tighten the pipes and it works great, just like new, now.
Less than 1 hr
Screwdriver, Pliers, Wrench Set
1 0
Recently had a lot of air bubbles coming from my jets. Found a crack and bad O-ring on my multiport valve. Found a replacement from pureline at a great price that was compatible with my Hayward filter. Perfect fit and great product! Inyo sells great product!
Less than 1 hr
Screwdriver, Wrench Set, pipe wrench
1 0
I ordered a new one from Inyo Pools and got it in a few days. With a screwdriver and a pair of pliers, I went to work on the old one. Loosen the clamp that held it in place, took unions loose on piping and pulled in out of sand filter with pipe wrench and removed fittings off the old head. Put fittings on new valve head, put back in sand filter, connected to the unions and put filter back in service. That's it.
Less than 1 hr
Screwdriver
6 0
We removed the screws on both sides on the bottom we pulled up on it and the white Pole needs to stay in Sand filter so be careful not to pull it up with top valve we put the new one on making sure the white Pole goes inside the open hole on new valve and the hose holes are lined up where they need to be. This part has been compatible just like the customer service stated it would be. Works great no problems.
$144.09
$719.00
$769.00
The Most Helpful Review
9 0
(5 out of 5 stars) Exactly the correct part I needed to put my pool filter back in operation.
Reviewed By: Superman from Clarksville, Tn ()
Pros: Easy to find the part I needed
Cons: None
I looked all over for this part. Many places have the part number listed, however, I was no longer available. My filter system is in its 13th year of operation and needed some updating. Happy you could help me in that mission.
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars) Easy replacement
Reviewed By: Inyo Customer ()
Our old top mount valve served it’s purpose for many years and it was just time to upgrade to a new one. This was a perfect replacement for our Hayward sand filter & incredibly easy to install. The only thing I wish I could fix on all of these valves is making the label on top more durable so it doesn’t fade each season & we are left guessing which direction does what (yes, you would think we would remember which one is vacuum & which one is waste by now, but sadly we forget every year).
Was this review helpful to you?
(5 out of 5 stars) Hayward Sand Filter replacement valve
Reviewed By: Inyo Customer ()
Perfect replacement for Hayward Sand Filter that I I use with my Super 2 Pump
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
best price great shipping
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Great quality
Was this review helpful to you?
(5 out of 5 stars) Solved our problem
Reviewed By: Inyo Customer ()
Solved our problem
Was this review helpful to you?
(5 out of 5 stars) Good value!
Reviewed By: Inyo Customer ()
Good value!
Was this review helpful to you?
3 0
(1 out of 5 stars) 2 Defective Valves
Reviewed By: Inyo Customer ()
First off, Inyo Pools has been awesome with their communication and service and this review is not reflective of their company. I have now received 2 of these generic valves and they both LEAK in the same place; where the top part with the handle is mounted to the rest of the valve body. Also, the screw hole where the pressure gauge is supposed to be installed always leaks as well no matter how tight you attach the plug or gauge. One more thing, the gauge, when installed as tight as possible, faces the ground... That is not helpful.
Was this review helpful to you?