Part # 4703-23
Manufacturer Code SPX714CA
Dimensions 5" L x 5" W x 4" D
Alternate Part #'s 4703-23, HPPSPX0714CA, SP0714C, SP0714CA, SPX0714CA, SPX714CA, PL0730
PureLine Replacement Diverter with Spider Gasket for Hayward SP0714T Valve - Comparable to Hayward SPX0714CA
This is the PureLine Replacement Diverter and Spider Gasket for the Hayward SP0714T Valve. Normally when you start to see leaking from your backwash port this is a sign that your spider gasket has gone bad and this valve diverter assembly needs to be replaced.
This Diverter assembly includes the diverter with the 4-spoke spider gasket glued in and is used on the Hayward Multiport VariFlo XL 1.5" valve. The model number for the valve is SP714T, also listed as SP0714T. The valve is used on various Hayward top-mount sand filters. The spider gasket is not available separately and can only be purchased as part of this diverter assembly. This is an After-Market part and not the O.E.M original by Hayward.
Easy Homeowner Installation
Watch our Video on How to Replace Your Hayward Diverter with Spider Gasket
Commonly Used On
Included with Diverter Assembly
Disclaimer:
All manufacturers’ names, brand names, trademarks, images, symbols, descriptions, and part numbers are used herein for reference purposes only.
How do you get the old key. Seal assembly out of the old shift handle housing
Th tension spring is very strong..once out how do you compress the spring to put new key seal & spring and pin back in? Any tricks on spring compression?
Jacuzzi 7 pos Diverter valve
Any replies would be helpful & appreciated. thank you
Reply
My handle broke of when I tried to move it. Is this the part that I need to put the handle back on?
Reply
Hi, If you have the SP0714T Valve and the handle is in good condition but the part that the handle is connect to is broken then yes. If the handle is broken then you will need to replace the Handle-SPX0710XF.
Reply
Less than 1 hr
Screwdriver, Hammer/Nail-set, Large Wood Clamps
1 - Remove Valve screws and pull out assembly.
2 - Use hammer and Nail set to knock pin out of handle releasing old Diverter
3 - Unless your spring is worn you may have difficulty putting it back together (I replaced with a fresh spring at the same time). I found it necessary to use two clamps to squeeze down the spring pulling the two parts together enough so I could then align the holes on the handle with the hole on the Diverter. This allowed me to put the pin through and tap it in place. Without clamps I am not sure how I would have done it (don't understand how other DIY stories skip this - without clamps or a friend not sure how I would have gotten it back together - without clamps it requires two hands to squeeze the two parts together evenly (I didn't do this initially and broke the part) and then a third hand to put the pin through).
4- Once re-assembled - screw back into place - make sure all gaskets are in place - and lube them if desired.
The Most Helpful Review
3 2
(5 out of 5 stars) great part
Reviewed By: Jonathan M. from jacksonville NC ()
this part is a perfect fit, as been all parts for inyopool.com easy to replace after removing all bolts and handle just simply push assembly out the bottom and replace the 2 o-rings and backup ring, simple
Was this review helpful to you?
The Most Recent Reviews
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Didn't need, had to buy the whole unit.
Was this review helpful to you?
(5 out of 5 stars) Perfect fit
Reviewed By: Inyo Customer ()
Perfect fit, solved problem
Was this review helpful to you?
(5 out of 5 stars) It worked out good
Reviewed By: Inyo Customer ()
It worked out good
Was this review helpful to you?
1 0
(5 out of 5 stars) Very easy to replace
Reviewed By: Inyo Customer ()
Very easy to replace
Was this review helpful to you?
(5 out of 5 stars)
Reviewed By: Inyo Customer ()
Perfect fit
Was this review helpful to you?
1 0
(5 out of 5 stars) Works great
Reviewed By: Michael M. ()
Easy to replace. Works great.
Was this review helpful to you?
(5 out of 5 stars) Diffuser
Reviewed By: Martin S. from Talladega, AL ()
Pros: Great Product
Cons: none
Product worked great. No issues. Used to repair some else's pool valve.
Was this review helpful to you?