Pool Deep Ends - The Real Pool Guy

Above Ground Pool Deep Ends

I am often asked about an above ground swimming pool’s depth. Above grounds come in three main wall heights: 48”, 52”, and 54”. Some of the really inexpensive models are also available as a 42” height wall (which is much lower), but I’m not going to include them because they are really cheap and don’t last very long. Now for those of you who can’t read a tape, the 48” is the same as four feet; the 52” wall is four feet and four inches; and the 54” wall is four and a half feet tall. Already too much math? Sorry, but here’s more.

Now the above numbers are the height of the actual pool’s wall and NOT the real depth of the water. An above ground pool has a top structure and a skimmer and the water level is not meant to reach the very top of its structure. In general then, the water level will be about six inches below the top of the pool. So, the average water level is going to range from 3’,6” to 4’ deep. The next question that usually comes to mind is, “Is this pool deep enough for me and my family?” Some shorter people or people with small children will ask if this is too deep.

In most cases, a depth of about four feet would be fine for pool owners. Some people though want a pool that is deeper than that. Maybe they don’t want to be in control all the time by always being able to touch the bottom of the pool. Maybe they want to drift aimlessly around a seemingly bottomless abyss while they wonder about the dangers beneath their feet. OK, probably not, but some do want to have a deeper pool so that their bodies are better covered by water while they are standing in the pool. So to those wondering, you can have a deeper above ground pool. But how much deeper?

click here to find your Replacement Above Ground Pool Parts

At this point it’s worth mentioning that all round shaped above ground pools are capable of having a deep end/center. Most ovals, though, are not capable of having a deep end/center. Most oval pool designs have metal straps that run under the pool’s bottom and therefore it will not allow you to dig your pool deeper. Just so that you know.

Related How-to Guide & Video: How To Install Above Ground Pool Liners

So How Deep Can You Go?

This depends on two things – what type of liner the pool has and how big the pool is. In most cases an above ground pool with a deep center is about one foot deeper in the middle. That’s the average and what I would recommend. Well, with the way above ground pool liners are these days, I’d safely say you can go about 10” deeper since liners are made with less material than they used to be. I would say go down about only a foot deeper for two reasons. One is you can still use a standard size liner and the other is you can shape the pool’s bottom better.expandable-liner

A vinyl pool liner can stretch. They are designed to be a little smaller than the pool so when you install them, they can expand to fit perfectly to something that may not be that perfect. It’s been my experience that a standard size liner can accommodate a pool bottom that has a gradual grade down to about one foot deeper in the center. If you go any deeper than that, the liner may be too tight. Now if just a foot deeper in the middle is just not enough, you can go deeper but you will need to get what is called an expandable liner.

Why Is It Called an Expandable Liner?

linerinstall2
You can call this the Gravity Method, AKA the Lazy Man

I don’t know why it is called an expandable liner. It’s confusing as most people think the term “expandable” means the liner is made from a different material that maybe expands more or better than a standard liner. It doesn’t and is made with the same material as any other liner. They’re not more special or any cooler. The only difference between an expandable liner and a standard liner is that the expandable has about 12 inches more side vinyl material. This extra material will allow you to go down an additional foot for your pool’s deep center. If you’re good at math then you’ve probably already figured out that with an expandable liner you can now have a two foot deep center for your pool. Keep in mind too that expandable liners only come as overlap types. There are no j-hook or beaded liners that are also expandable. If you want a nicer looking j-hook or beaded liner for a pool with a deep center that is deeper than one foot, you can get that. It’s going to cost you though, because that would be considered as a custom liner and they are pricey.

The size of a pool also plays a factor in how deep the center can be. You wouldn’t want to have a two-foot deep center in a round pool that is only 12′ in diameter as the area is too small so the grade to the center will be too great. This brings up the other major consideration – shaping.

Shaping a Deep Center for an Above Ground Pool

Standard above ground pool liners are designed for flat bottoms. They have a flat round bottom piece with no extra material to accommodate a shape other than flat. Like I mentioned earlier, they do stretch quite a bit so a hooper can be made and the liner will fit its contour with little issue. Though, a concern is wrinkles. If a deep center is

Example of Liner wrinkling.
An example of Liner wrinkling.

shaped properly, the liner’s bottom will have a few or no wrinkles at all. Though, the shape has to be more like a dish instead of an upside down pyramid. Sharp edges and deeper grades will most certainly produce wrinkles in the liner that will run perpendicular to the pool’s wall. It’s not the end of the world to have wrinkles, but they do make it harder to vacuum the pool, don’t look that good and you can feel them. Having some wrinkles shouldn’t affect the liner at all. Also, you should allow for some flatness on the bottom of the pool before the edge of the hopper for the deep center. This means having a smaller dish in the center of the pool instead of the pool’s bottom being shaped more like a giant satellite dish (like the ones from the eighties) from wall to wall.

Deep centers for above grounds are pretty cool but not my favorite option and will make the job of installing the pool bigger. I charge an extra $250 for a standard one foot deep center on a 24’ round pool and never really want to do the job. They can make it slightly harder to maintain your pool too and if not shaped well, it will give an automatic cleaner some trouble. Though, when they are done well, pool owners seem to enjoy them so don’t mind my negativity. They’re just a pain to dig.

If you have any questions on your above ground pool then we would be happy to help, feel free to give us a call at 1-877-372-6038 or email us at upload@inyopools.com If you liked this article then make sure to sign up for Blog and get our Free 128 Page Pool Care Guide.

 

64 thoughts on “Above Ground Pool Deep Ends

  1. They’re putting in a 12 x 24’ rectangular inground pool. I wanted a deep end so it’s 7 foot deep now I only have 3 foot length at my shallow end.

  2. Is there a decent robotic vacuum that works well with deep middles? I have a 24′ Rd x 52″ deep pool. 2.5′ ledge before it starts to slope down about another foot.

  3. I had a 24x 48 pool with a deck all the way around it. It id dug down a foot in the middle. I bought a used pool that was supposed.to be 24×48 but is 24×52. Can I put the pool in the ground 4’’ to line up with my deck?

  4. Hi Dan, I thought I posted this comment on Monday, but it doesn’t appear that it posted.

    I’ve read all the info, including Q&A on this page and it was GREAT info; I just need a bit more info regarding my exact scenario. We have an Esther Williams above ground. It is 16x30x50 – oval. There isn’t any medal underneath, so we are thinking about making it deeper, since we are now replacing the liner. I know above, it’s recommended to start at least 8″ from the wall and gradually make it deeper, to the middle. Since we have an oval, does it work better to have a “deep end”, or still just get deeper in the center? Also, would we still keep the 50″ (custom-made) liner, or should we get the 52″ – would this differ if we do end vs middle (I don’t think with adding max depth we would need a 54″ liner, correct)? To clarify, also, should we not go deeper than 1′ at the most, or wasn’t there somewhere in here that stated you could go 1-1.5′ deeper? What would you recommend for our specific size/shape? Thank you so much for your time!!!

  5. I’m looking at a 30′ round, 52″ deep pool. I’m digging the middle down to about 62″. I’ll be taking my time so I can ensure rock, roots etc are removed and its as smooth as possible. I kept the ground level with my last pool and the liner lasted 5 years (intex).
    That said, in your experience, is there an appreciable difference on the life of the liner if I use concrete? The answer may be common sense, but its an aweful lot of concrete to pour without being sure.

  6. Hi,
    I’m replacing my existing 27′ pool with a 30′ round 52″ pool. I have a 52″ liner. My existing pool has a deeper center and I’d like to do the same thing with the replacement.
    How deep can I go?
    How wide should the ledge be?
    Should it be dug into a bowl or cone shape? The pool we have now is a cone. If I’m digging a bowl, how do I make sure the base is compacted and smooth?
    How do I make a flat surface for stairs or a ladder or can you recommend some that work in a sloped bottom pool? With a sloped bottom in our existing pool, we weren’t able to find any quality stairs.

    Thanks!!

  7. Hi Dan,
    Thank you for this and all your other articles – VERY HELPFUL !!

    Our above ground 27′ pool (52″ wall) became un-repairable after this last Maine winter this year so we are looking to replace it after 22 years (same liner all this time).

    The middle is scooped out by ~24″ (its just over my head). It has ~3 ft a shelf around the edges of the pool, and we use those as well. I am sure it is painful, but we really liked the setup.

    I see many pools already come with a liner. It seems like we need to purchase an additional 72″ expandable liner, correct? I see a few right here on InYoPools.com !

  8. I am replacing a liner on an above ground pool. It was purchased from the company that originally put the pool up. Does the sand need to be exactly 52” deep for a 52” liner? In some spots it is about 50”. The pool is 27’x52”. Thanks.

  9. I have a 24′ round above above ground pool with a center depth of 65″.What size expandable liner should a use…60″ or 70″

Leave a Reply

Your email address will not be published.

Recommended Resources

What are the eletrical requirements for installing above ground pools?

What are the Electricity Requirements for Above Ground Pools?

This may not sound possible, but way back in the eighties I built an above ground swimming pool at a home...
Read Now

Liner types and above ground pool decks

November 14, 2017
Liner types and above ground pool decks In this video, we take a look at different above ground pool liner types...
Watch Now

Should I buy a used above ground pool?

July 14, 2017
Should I buy a used above ground pool? In this video, we go over the facts on whether you should buy...
Watch Now
above ground pool installation

8 Reasons You Should Install an Above Ground Pool in the Off-Season

In most areas of the country, above ground pool installers are few and far between.  Here in Central Florida there are...
Read Now

Looking for pool parts?

Shop Motors Shop Filters Shop Pumps Shop Salt Systems Shop Lights Shop Cleaners
Copyright © 2024 INYOpools All rights reserved