The Difference Between Pool Clarifier and Flocculant

The Difference Between Pool Clarifier and Flocculant

Cloudy pool water is usually caused by dead algae or mists of particles suspended in your pool water. The job of a coagulant agent, like clarifier or flocculant, is to clump these tiny particles into larger clumps so that they can be collected by your filter or flushed to waste. 

Now, clarifier and flocculant (floc and vac) are two sides of the same coin. Both are types of coagulant agents that accomplish the same task using different routes. The key differences are the time it takes for the reaction to take place and the extra elbow grease needed from you to finish the job. We will discuss the pros and cons and the best times to apply which chemical. 

Clarifier 

clarifier clears cloudy pool
Cloudiness can floating dead algae

Pros: 

  • Least amount of work for the user 
  • Great for light cloudiness and superfine silt 

Cons: 

  • Takes several days to get the desired result 

Pool clarifier is a mild coagulating agent that boosts your filter’s cleaning capabilities by clumping small dirt particles into larger particles your filter media can trap. Safe to use with sand, DE and cartridge filter systems, clarifier requires that your pump and filter are run continuously for at least the first 24 hours for optimal results. 

Clarifier is a milder chemical than flocculant making for a slower work rate. Your pool’s reaction to the clarifier may take a couple of days before you see the results. So, if you are needing a quick fix for a pool party only hours away, clarifier will not be the choice for you.  

Clarifier is the ideal choice for mild cloudiness or a regular part of a cleaning regimen to give your water that extra sparkle.  

Flocculant 

flocculant fixes cloudy pool
Flocculant at work

Pros: 

  • Shows results within a few hours 
  • Super effective  

Cons: 

  • Requires vacuuming 
  • Water waste 
  • Can’t be used on systems with cartridge filters (unless there is a bypass) 

Flocculant’s coagulation process is basically a supercharged version of a clarifier. But instead of relying on a pool filter to do the cleaning, it requires vacuuming. Floc clumps the dirt into large clots, so large that they no longer float, dropping all the dirt to the pool floor where you can then vacuum to waste. Your pool should show marked improvement within a few hours of its application, making it ideal for procrastinators (like me) cleaning just before a pool party. 

Floc can be used for mild cases of cloudiness all the way up to murky. However, I usually suggest it as a last resort, because you must vacuum it to waste. You can lose a good bit of water while cleaning the pool. 

Floc should never come in contact with your filter media as the clumping agent can cause havoc. Floc is only suggested for use with filters with bypass options, i.e. sand and DE filters with multiport or slide valves. It is not suggested to use floc with a cartridge system, unless you have plumbed a bypass for the filter.  

So which is best for you? 

Clarifier is best suited for basic maintenance, and picking up straggling silt your filter just can’t seem to catch. Flocculant is best for more severe cases, like part and spring cleanup. Flocculant shows results within a few hours, making it great for cleaning in crunch time. 

 

65 thoughts on “The Difference Between Pool Clarifier and Flocculant

  1. I used lo phos max to remove phosphates which were above 3000. I now have sediment on my pool floor which it seems is too fine for the robot cleaner to pick up. It seems to just kick up this debris. Should I try a clarifier and see if the filter will remove it? Is the only way to remove it is to vac to waste?
    I have NO idea where my high levels of phosphates originate each year. No leaves, fertilizer, pets, birds…..it’s real mystery.
    Thanks for your help.

    1. I have the same issue and no one seems to have an answer! All I can tell you is we have been backwashing every day and slowly it’s clearing up. I will never EVER put phosphate remover in again. After a lot of research if your water stays balanced the phosphates will be too. Sorry wish I had a better answer!

  2. Awesome Informative blog…
    Thanks to everyone for your various questions, situations and suggestions…
    More importantly is that the owner of the blog and it’s readers.., took the time to answer!
    WONDERFUL SITE! Thank you all!

Leave a Reply

Your email address will not be published.

Recommended Resources

Why is my pool green after filling with fresh water?

PSC Ep. 89: Why is my pool green after filling with fresh water?

In today’s episode of Poolside Chat, Rob and Matt tackle another common swimming pool question:  I just filled my pool and...
Read Now
PSC Ep. 55: How to remove oil from pool water?

PSC Ep. 55: How to remove oil from pool water?

In today’s episode of Poolside Chat, Rob and Matt tackle another common swimming pool question: How to remove oil from pool...
Read Now
How often should spa water be changed?

PSC Ep. 82: How often should I drain my spa and add fresh water?

In today’s episode of Poolside Chat, Rob and Matt tackle another common swimming pool question:  How often should I drain my...
Read Now

Looking for pool parts?

Shop Motors Shop Filters Shop Pumps Shop Salt Systems Shop Lights Shop Cleaners
Copyright © 2024 INYOpools All rights reserved