Do I need a timer for my salt system?

PSC Ep. 90: Do I need a timer for my salt system?

In today’s episode of Poolside Chat, Rob and Matt tackle another common swimming pool question: 
Do I need to put my salt system on a timer?

The quick answer would be yes, you’d want to put your salt system on a timer unless your salt system has a built-in timer, which there aren’t that many of. I think the Autopilot, maybe the AquaTrol, the Hayward salt system above ground pools. But yes, you’d want to put it on a timer. We get a lot of questions like, well, doesn’t have a flow switch. Shouldn’t the flow switch tell the system to turn off if there’s no flow? It could malfunction. It might not turn the system off if the pump schedule ends. It could continue to create chlorine, even though there’s no water flow. Then you run the risk of the gas building up and potentially causing the cell to explode. That’s the real reason you want to put the salt system on a timer.

Could you put the salt system on the same timer as your pool pump?

The majority of pool owners have their pump on a mechanical timer. They then connect the salt system to the same loads that your pool pump is on; that way it turns on and off at the same time as your pump. Some people have variable speed pumps that aren’t on a timer. In that case, you’d want to get an external timer for your salt system if it doesn’t have a built-in timer. Some variable speeds do have an auxiliary connection at the back where you can connect a salt system, but there’s not many of those out there. I think the PureLine Prime 2.7 because it has the VGreen motor, has an auxiliary connection, but besides that, you need an external timer.

If you’re looking or if you’re interested in a timer for your salt system or pool pump, you can take a look over at INYO Pools. If you have any questions or comments, please leave them down below. Feel free to like and subscribe. Thank you for joining us. Bye.

3 thoughts on “PSC Ep. 90: Do I need a timer for my salt system?

  1. Hello,
    I read your article about common low pressure problems. I have not seen my particular issue addressed in that article or through my internet research. My issue is I have three returns but only one seems to being working normally. Water just trickles out of the other two. Two returns are fed from one pipe and the other return (the one that is working) is fed by another pipe. There is a valve or diverter that controls the returns. When I turn the valve to direct water to the two returns, I don’t see any noticeable change in the water output. When I direct the water to the one return, it works very well. What do you think is the problem? Thank you.

    1. I would hazard a guess to say the one pipe feeding two returns is the problem. You kind of already figured it out, the pipe that feeds one return works fine, then the pipe that splits its output to two returns has low pressure when both are opened.

      If you want those other lines to work, you can put a valve on the single pipe and return line to throttle back its flow, which will, in turn, push more flow to the other two.

Leave a Reply

Your email address will not be published.

Recommended Resources

What’s the Difference Between a Start and Run Capacitor?

PSC Ep. 60: What’s the Difference Between a Start and Run Capacitor?

In today’s episode of Poolside Chat, Rob and Matt tackle another common swimming pool question: What’s the Difference Between a Start...
Read Now
Poolside Chat Episode 9 - Fiber Optic Light Replacements

Video: Poolside Chat Episode #9 – Fiber Optic Pool Light Replacements

This is Poolside Chat where every week we answer your questions on how to fix and maintain your swimming pool. Poolside...
Read Now
Poolside Chat - Leaking Filter Valves & Variable Speed Motors - Inyopools Episode 1

Video: Poolside Chat Episode #2 Leaking Valves & Variable Speed Motors

In today’s episode of Poolside Chat, Rob and Matt tackle two common swimming pool questions: How do I repair a leaking...
Read Now
what is the difference between suction, pressure and robotic pool cleaners?

Poolside Chat Episode #21: Suction, Pressure, and Robotic Pool Cleaners

This is Poolside Chat where every week we answer your questions on how to fix and maintain your swimming pool. Poolside...
Read Now

Looking for pool parts?

Shop Motors Shop Filters Shop Pumps Shop Salt Systems Shop Lights Shop Cleaners
Copyright © 2024 INYOpools All rights reserved