What Shaft Seal Do I Need?

I have heard this question probably every day for the last  few years and I’ve done the same (sometimes) long winded explanation. The thought of actually putting it into text has always fallen to the wayside during the rush of pool season. Today we are setting our sights on the subject of Shaft Seals and we are not going home until it is mounted nicely on our mantle. We will discuss the definition and function of the shaft seal, the components and the 3 main types of shaft seals. Let’s get started, shall we?

What is a shaft seal?

Great question! The shaft seal is a two part mechanism that consists of a white ceramic piece usually sleeved in rubber (The Seat) and a retainer spring with face ring (The Head).  The white ceramic coupled with the sleeve is installed into the seal plate whilst the spring loaded piece fits to the stem of the impeller. As we screw the impeller onto the shaft’s tip, the face of the ceramic and black ring of the spring side will meet. As we hand tighten the shaft seal, we will notice the spring compressing to keep a constant pressure on the two parts.  The spring ensure both faces’ sides are constantly in touch, similar principle to a car’s keeping your tire to the road. The is also a rubber sock lining the inside of the spring to prevent leaks.

click here to find your Replacement Pool Pump Motor Parts

Also, the shaft seal is an insurance policy. No really, it is. When you replace a motor, any respectable technician will want you to change the shaft seal  as well. When pool owners hear the warning they may push it to the side. The homeowner may think the pool man is attempting to pad his service call payday. In reality, he is making sure he does not have come back out to your house in a few months because of a leaky motor. A wet motor is a dead motor; also never feed your motor after midnight. (I’m kidding about that last part).

RUSTED MOTOR FACE
Water Damage caused by Bad Shaft Seal

The symptoms of a bad motor caused by a failed shaft seal are bad bearings and water whirling. You will not need a pool tech to help you identify a bad bearing situation – all you need are ears. The unmistakable grinding roar of a bearing is heard from two houses away. The motor bearings grow loud because of rust forming on the stainless ball bearings that allow the shaft to spin. The likely cause of this rust is water which has seeped through the shaft seal through the motor’s shaft hilt and into the motor.

The phenomena of whirling is seen on the face of the motor. This white haze shown in the picture is residue left from water that has been trapped between the motor face and seal plate. This whirling pattern will eventually become rust and a new motor is soon to follow.

And for the curious few out there looking to install a shaft seal themselves, here is our how to guide covering the task step by step: How To Replace a Pool Motor Shaft Seal

What’s all the hype about the type?

Standard Chlorine

The standard issue shaft seal in pool pumps for decades its ideal application is for your standard chlorine pools.The materials that make up this shaft seal are not applicable to saltwater or pools with ozonators. Sidenote, though seals can be left installed for years we suggest after prolonged dormancy periods, like winter closings, that you replace the seal the following spring.

Components

  • Stainless Steel Skeleton – The retaining spring and its frame.
  • Phenolic Plastic Primer Ring – The black plastic ring that interfaces with the white ceramic piece to create seal.
  • Ceramic Seat – The white ceramic ring that is housed in the rubber sleeve.
  • Rubber Components – The sleeve in which the ceramic seat fits, as well as the inner lining of the retainer ring.

Application:  Residential chlorine pools

click here to find your Replacement Pool Pump Motor Parts

Saltwater Seals

Salt Water Generators (SWG) are sprouting up in backyards quicker than crabgrass. Their relatively low maintenance and long term cost efficiency have proven to be key factors in their popularity. As a matter of fact, I love them because they cut my work in half but pool pump shaft seals do not share my enthusiasm for SWGs. The two mix about as well oil and water, or in this case, salt and rubber.

Salt has a natural tendency to draw and hold water from its environment.  This phenomena is called hygroscopy. A couple of examples of this reaction are the curing of meat or salting of the earth to prevent plant growth.  The salt pulls the moisture from the subject preserving it or in the latter, killing growth.

This reaction from hygroscopy is deadly to the rubber and phenolic plastic in the standard pool pump shaft seal. As the salt removes moisture from these components, their elasticity, durability and dependability leave with it.  As the parts are drained of these properties, they begin to shift in place, breaking the seal’s integrity. This domino effect creates seams between the two halves of the seal eventually leading to water seepage to the motor.

Components

  • Polished Ceramic Seat – The polished surface prevents corrosion or scratching caused by salt grains being caught in a porous surface.
  • Viton Rubber Components – A high grade rubber used in scuba and automotive equipment; it is chemical and salt resistant. To ensure you received the correct seal, Viton rubber is marked with green dot by the manufacturer.
  • Carbon Retainer Ring – Resists the corrosiveness of salt water.
  • Stainless Steel Skeleton – The retaining ring and its seat.

Application:  Used for saltwater pools and spas but also applicable to installations using ozonators. We normally suggest the saltwater shaft seal for even standard applications because of its reliability and ruggedness. The seal’s proven track record in touch installation outweighs the extra 5 – 7 dollars more it costs than a standard shaft seal.

Silicon Carbide Seal (SCS) – Commercial/Residential

These seals are the special forces of their kind. The SCS seal holds up against corrosive chemicals, water, and loss of prime. The superior silicon carbide material reduces heat within the seal allowing the motor to run dry for longer. If a standard seal were to run dry due to loss of prime, it would melt and possibly damage the motor.

Components:

  • Primary and Mating Ring – The two faces of the seal are made of silicon carbide which is more abrasion resistant than the carbon or standard ceramic styles. The chemical makeup of the parts allowing a cooler run temperature ensuring a longer life and less chance of damage if run dry.
  • Viton Rubber – Again this rubber is used on the premium seals to eliminate the chance of rubber breakdown due to corrosion.
  • Stainless Steel Skeleton – Standard corrosive resistant retainer spring and cuff.

Application: There are no major operational limitations to this shaft seal like there are on the previous models. The SCS can handle pretty much anything with the only downside being the price. This one seal can be twice as much or more than its saltwater counterpart.

The Sum of its Parts

Pump shaft seals share component functionality that is virtually identical throughout the major manufacturers. The function of the components may be similar but the style or design of the component may vary.  Here we list the varying style of shaft seal heads and seats as according to U.S. Seal manufacturer handbook:

Head Styles

HEAD STYLESType A – This is one of the two major standard shaft seal head style for inground pool pumps. Seen on major pump brands like Hayward Super Pump, Super II and Pentair Challenger.

Type B – Commonly used on Pentair WhisperFlo, American Products, and Waterway.

Type C – The least common of the head types, these are usually found on pumps like ITT  Marlow, AquaFlo.

Type G – Normally found on premium pumps such as a Hayward Tristar or variable speeds pumps, it features a rubber butt end which helps with fit.

Seat StylesSEAT STYLES

Type 1 – Standard style for inground, spa and spa pumps. The rubber sleeve ensures a firm watertight installation into the seal plate.

Type 2 – An antiquated style slowly be phased out for the type 1; an example of a type 25 shaft seal is found on Sta-Rite Dura-Glas models manufactured before 1998.

Type 31 – Found mainly on above ground and spa pumps, these seats include a rubber sleeve as well as a glass/plastic protective shield.

Type 32 – Used on Vico spa pumps mostly, this is the least common of all seats.

Well, that covers it in terms of shaft seals.  If you have any more questions or if you think we skipped anything, please give us a call and let us know. We can be reached at 877-372-6038.

click here to find your Replacement Pool Pump Motor Parts

13 thoughts on “What Shaft Seal Do I Need?

  1. Aloha Matthew:
    I ordered a motor from you folks and the Pentair go to kit. I still haven’t put it on because we’re behind due to so much rain in Florida it is raining every single day and every time you get ready to do something it starts to rain so we are behind. But I am now finding out about the saltwater super seal and I only ordered the Pentair “o” rings and seals fix it kit. Which does not have the super shaft seal in it. Is that something that I should buy and send the other piece back? Now that I am reading so much about this super shaft seal and specifically in this article why my saltwater pool should be using it I am concerned about doing all this work putting on the motor ( we are still on step 16 of the 55 steps on the video of how to put the motor on) and not having the proper seal. What can we do about this I still have yet to even open the box that you have sent with the motor and the Pentair o-ring kit. I would need to know which piece of the Pentair o-ring kit. I need to know which is the seal I am supposed to send back to get the proper super seal for my salt water pool that I have. Can you assist me on this?
    Thank you very much Antoinette Jackson This is my order number and the items I bought.
    Product Item # Quantity Total
    A.O. Smith 1 HP Square Flange 56Y Up Rate Motor – B853 1 $177.99
    Tune Up Kit Pentair SuperFlo/Sta-Rite SuperMax

    1. Hello Antoinette, I would give our customer service a call so we can confirm all your equipment and get the right saltwater shaft seal out to you. Give us a call at 407-834-2200.

  2. I have an Intex above ground pump. Intex will not sell me a new shaft seal (or new pump as the replacement pump is back ordered and I can’t order for over a month) and I am using a SWG. Do you have anything compatible with theirs? I can text a picture of their shaft seal, but don’t see where to upload one here. Thank you! Interior diameter of the non ceramic side is about 9/16″ and o.d. is about 15/16″, so it is much smaller than the ones I’m able to find at the local pool stores.

    1. Gaskets and seals are matched to the pump housing, not the motor. We would need the pump info to find the correct seal. The tag information we need will be found on the pump side.

      pool pump wet end information

  3. Bought a motor and salt water seal kit… lots of seals. Pump is a Pentair-3 Wisperflo. Does Inyo have instructs or diagrams online that could assist in the installation and identification of where all the seals go? Maybe the kit coms with extra seal options?

  4. Hi my name is Anthony and i’m looking for a shaft seal kit for my pump. I can’t identify what pump i have because the placard faded and it’s partially ripped. I took it apart and all i can find is a number C103-137P1 on my seal plate. Does that do me any good?

      1. Hi, my name is James and i have a Pentair EQ500 pump that is leaking from the seal.
        do you know what type of seal or kit i need, and where i might find it.
        would appreciate your imput.
        many thanks

        1. Hi,
          My name is ralph am looking for a mechanical seal for my pump model:
          Model: EcoMax 150A whom and where can I buy seal kit thanks would appreciate your input many thanks,

Leave a Reply

Your email address will not be published.

Recommended Resources

What is the correct orientation for my pump shaft seal?

October 25, 2017
What is the correct orientation for my pool pump shaft seal? In this video, we look at the correct orientation for...
Watch Now
Which pool chlorinator to use?

What Type of Pool Chlorinator Should I Use?

​Chlorine – your pool needs it but what’s the best way to get it into the water?  While you can add...
Read Now
Poolside Chat Episode #29: Best Above Ground Pool For Salt Systems

Poolside Chat Episode #29: Best Above Ground Pool For Salt Systems

This is Poolside Chat where every week we answer your questions on how to fix and maintain your swimming pool. Poolside...
Read Now

Looking for pool parts?

Shop Motors Shop Filters Shop Pumps Shop Salt Systems Shop Lights Shop Cleaners
Copyright © 2024 INYOpools All rights reserved