Why Is My Pool Cloudy?

59 thoughts on “Why Is My Pool Cloudy?

  1. Thanks for the information Charlie my pool now back to looking great, thanks to yourself for pointing out the fault’s that can happen. B-)


    1. I had the same issue.. come to find out that it was a cracked lateral in my filter and sand was going back into the wate. Hope this helps.

  3. I have a cartridge unknown age but looks just fine. You touched upon this but so briefly not too clear.
    Back pressure did go up and it filtered fine – to a point. Now the fine stuff just passes through.

    My question is should I try replacing cartridge (expensive) or just buy clarifier (temporary).
    Is Home Depot filter as good as better name brand cartridge.

    1. The first step would be to buy a clarifier, it will gather up all those lingering particles. Then you can give your cartridge a chemical soak to clean it thoroughly; hopefully, that will fix any filtering issues. If the recycling dirt issue persists, I would change the cartridge because there could be a tear.

  4. We have a chlorinator for our pool. What type of chlorine tablets are the best? Or does it matter? I am looking at 2 systems: TrueBlue and Enjoy. Do you know or recommend either of these two?

    1. I am not familiar with either of those brands, but both should be able to do a decent job. Regarding chlorine tabs, I have heard big box store brands tend to be low quality.

      I would read the reviews, and then make your pick of the one you feel comfortable with. If it doesn’t do the job, move onto to a new brand; don’t think of it as being stuck with whichever brand you choose first.

  5. Hello. I installed a FlowVis flow meter in my return line after my filter. I now have a cloudy pool and the filter is running at a higher pressure. Around 20 psi. Could the flow meter be restricting flow?

    1. Did the issue arise right after you installed the flow meter? Also, did you match the pipe size? meaning, if you have 2″ PVC, did you get a flowmeter that is piped with 2″ pvc?

      If your pool is cloudy, that could be dead algae. That could also explain the rise in filter pressure, dead algae clogs up filters quick. I would shock your pool, then run some clarifier, with a steady dose of backwashing or filter cleaning to clear it up.

      1. The clouding did occur after I installed it. It is sized to match the existing pvc. I installed it before I opened the pool. I have been shocking it about once per week. I have used algacide and have been chlorinating it. I don’t see algae on the walls and what i can see of the shallow end appears largely clean. Cant see the floor of the deep end. Its a 25000 gallon concrete pool with one filter intake and one return. I adjusted for ph and alkalinity this evening. How often do you recommend backwashing it?

        1. You don’t see algae because it is dead now. That cloudiness is the ghost of algae past.

          If you had algae when you opened your pool, then you shocked and killed it; the carcass of the algae bloom does not evaporate, it stays in your pool until you deal with it. You just need to keep filtering and backwash to get rid of it. Add clarifier.

          How to Clean a Green Pool?

          1. Thanks. I am beginning to see what you mean. I have been bringing the ph up and shocked it with liquid chlorine. Previous to that I vacuumed to waste and refilled the pool. I am back washing twice daily and getting results.

  6. Hi,

    We had an issue with metal in the pool that rusted and we were able to fully resolve it. Had sparkling water even! Shocked the pool and it was somewhat cloudy then 24 hours of filtration later it was perfect and sparkling again. We turned off the pump for 8 hours while at work (first time in 3 weeks it hasn’t been running) and came back to a pool that is milky colored. We have cleaned the filter and obviously have turned the pump back on and aren’t seeing any results. Suggestions??? We were so close!

      1. Hello
        My pool have clear perfect water but if any one go in water goes cloudly.
        If he go out agian its clear back.
        What is the reason of that

  7. I have a cartridge filter, and my water is more of an opaque than cloudy. Can only see maybe half foot down. I’ve tried balancing levels, and they are all good. Chlorine a little on the high side but not too much. The cloudiness won’t go away. we changed the cartridge filter no luck. I’ve also been vacuuming. I get quite a bit of leaves and particles out. some also rise to the top. I’m to the point where I want to use flock but don’t know how with a cartridge filter. Any ideas?

    1. Have you been dosing your pool with algaecide that contains copper?

      To use Floc with a cartridge filter, remove the cartridge from the tank while the Floc is circulating in the pool.

  8. Can a pool become cloudy from stirring up soda ash? I work at a public pool and that morning they dumped in soda ash and it was cloudy the rest of the day, barely clearing up. It was clear the next day…

  9. Cloudy pool

    I backwashed and oops forgot to rinse.
    I’ve added clear blue clarifier and will run filter overnight……..I’m assuming I will be able to vacuum and backwash / rinse a few times tomm….and hopefully problem solved.

  10. Hey Everyone! This is my first time on here “) We have had alot of rain this month and I have been on top of my water for the most part. I did take the water in to get tested the other day because although I know what I need in my pool to keep it balanced- I am not good t the math. I have a 12,000 gallon above ground pool with a sand filter. My water was clear and has been since we opened- never had a problem with algae or cloudy pool water. So here we go- Ph was low as well alkalinity and chlorine. My pool store is a mom and pop shop and they are great- not the kind to sell you products- I have been in many times and walked out not paying a dime. So I was told that I needed to add 12 pounds alkalinity (which is an amount I have never had to add before- and I had them test it twice because that seemed high to me) and was told to add 1 pound ph- let the filter run for four hours- then add 2 pounds shock (hypo-chlor granular- which is what we always use) and let pump run overnight. This morning my pool is cloudy. I can see the bottom but Its well–cloudy. I have never had this issue- even when I have had to add ph and alka before with shock. I backwashed the filter this morning- and tested the water- everything is on point in the normal range- chlorine reading are off the charts but thats to be expected after shocking. I am concerned about the cloudiness as my pool was crystal clear prior to adding the shock. I am hoping this will clear up- but seeing as how I have never had this issue is this a result of the shock? or a combination of all the chemicals? Even when I added to ph and alka the water was fine. My concern is how much alka is in there- even though it tested normal range this morning it seemed alot to have to add. Pool store is closed today so before I go and add any clarifier I want to make sure I am not adding something that will make it worse. Thanks.

  11. Hi, I have a 12’ pool, added clarifier to it, then thought I’d flocc it as I had used channel water to fill,

    The flocc has worked a treat! But now I can’t get it out :$
    My filter does not do what needs to be done for vacuuming, I have been able to remove the bulk of it but there is a long way to go lol

    Will the clarifier have died with the flocc? Or will it be working in the background still?

    Apart from the fat chunks of yuck the water now looks great!

    1. Hello Gerhard – I will need a little clarification on some things. When you say the filter is not working, can you explain further? Has the flow slowed? Is there air in the system?

      When you began removing the floc debris, were you vacuuming to waste or straight into your filter? Most floc instruction state to vacuum to waste, as the floc globs can make the filter media unusable. For more information about the differences of these two, read our other blog: The Difference Between Pool Clarifier and Flocculant

      Clarifier works over a few days, whereas flocct in a few hours. The addition of the flocculant after the clarifier makes the the latter redundant.

  12. Hello,

    Two questions. First, my pool water is hazy – can see the bottom but not distinctly. Changed the sand in my filter a couple of days ago as the previous owner did not leave records of maintenance. The internals looked good and the flow seems a little better. But, no improvement in the haze.

    The only chemical out of normal range is alkalinity at 180 ppm. Today, I added clarifier. I don’t mind allowing time for it to work, but about how long should it take for results?

    Also, can you provide the turnover data for a Hayward S244T filter?

    Thank you.

  13. I have a well balanced pool in all levels, (Although Cyranic Acid is just at 30 – tested with test stips and pool store’s test machine,) but I still have white cloudiness 3 days after shocking. I ran my sand filter for 24 hours after shocking, vacuumed and then backwashed. I run my sand filter 12 hours at night. My filter is less than a year old and the gauge is operating correctly. I did add a 2nd dosage of clarifier 2 days after the 1st as I was not sure how old the first bottle was.

    Should I just keep things going as is and wait, or is there some thing else I should check.

    I had read on a different manual to do stain ban and Clarifier before shock. So I did that differently than I normally do for start up.

    Thank you

  14. Hi, opened pool over a month ago and still cloudy. Blue but cloudy, cannot are the button. Even did 2 floc treatments and never cleared up. We have a new cartridge filter, we had an earth filter but seemed to be blowing earth back into the pool so we bought a new cartridge filter and have a lot better pressure but not sure why pool won’t clear up! Thank you

  15. Some folks have told us to dump the ancient pool water and begin all over again with minimal chlorine granules.
    Others say to replace the sand filter with a D E filter and “all will be well and crystal clear”.

    I am beginning to hate this pool.

  16. I have a cloudy pool. All of the ideas are possible, but my situation is a little different. My cartridge filter gauge never really goes up. I have a cloudy pool, but it never seems to climb. I swap the filter out after cleaning, but for the chemical clean you always say the pressure would go up. What would cause the pressure to never go up?? It has been a chore to get the pool going this year – trying to do it without emptying since I am on a community well. Any help would be great!!

    (I am battling with getting the ph down because the pool store told me to put 30 lbs of soda ash in it… ugh!)

  17. Hello, I am having an issue with my pump/filter.
    Every time the pump is on, there is water coming out of back washing drain. even when its set on filter

  18. I have a 20,000 gallon pool. When I opened it was green I have been running my sand filter 24/7 since I opened 2 weeks ago. The pool went from green to cloudy blue after a few days. Now I can’t get the cloudiness to go away. I have had the water tested at the pool store all chemicals are good. I have used a clarinet but nothing changes. The sand was replaced last year so that should not be the problem. From what I can tell the pool floor is clean of debris. Not sure what else it could be. Any suggestions?

      1. I am also having this same problem! Water is perfectly balanced and no longer green, but totally cloudy. I have a DE filter and started thinking I was blowing DE into the pool. I thought maybe some critters climbed in the open drain hole over winter and chewed up my grids. But the pressure does go up and I have had to backwash twice in the last week. But it is still not clearing up the water. Added clarifier a few days ago and nothing has changed.

        1. Hi Jen,

          Where you able to fix your issue? I am having the exact same issue and also thought D.E. was going into the pool. We are still struggling with the milky look, levels are great.

          Thanks in advance 😊

        2. The cloudiness could be dead algae that are still floating in the water. If you have to backwash that much, dead algae are what I suspect would be the problem. Use a flocculant, let it cycle through the water, then vacuum to waste

  19. We’ve had such trouble clearing our pool. It’s began as an opaque color. Even after balancing the chemicals we were still not seeing a difference. After spending hundreds in chemicals we decided to empty a third of our pool. We tested our chemicals added some ph and clarifier and in the morning we could see the bottom of the shallow end but still cloudy.
    Hardness – 250
    Total chlorine 3
    Free chlorine 3
    PH -6.8
    Alkalinity 180
    Stabilizer 50

    We got the PH To 7.2, added stabilizer and shocked the pool. Now total Chlorine and free chlorine are both nearing 10 PH is still low at 6.8 and stabilizer stayed the same at 50. Pool is still cloudy. Please help

  20. I also have a cloudy pool, running the filter 24/7. It is a cartridge we use in the filter. I had the water tested and my chlorine was 22. Everything else was fine. So now we are on day 6 and it still is cloudy. Will it ever clear or is there other avenues I should look at?

    1. Why is your chlorine so high? I would stop adding shock until it comes down to a reasonable level. There is an actual section for your exact scenario in the article.

      Did You Recently Shock Your Pool?
      If you recently shocked your pool and now it’s cloudy, don’t worry, they’re definitely related. However, how they’re related depends a lot on your pool. In most cases, a cloudy pool after shocking is only temporary and should clear up within 24 hours. Keep filtering your pool, add a little clarifier to help, and your pool should be clear in no time.

      If after 24 hours your pool is not clear, then you may need to look a little deeper for the solution.

  21. When i opened my pool it was clear. Filled the pool and added 2 cases of liquid chlorine. Now the water is hazy. Have a new filter too. I have test strips. All levels are good but chlorine shows 0. Do i add even more chlorine? How do i get water clear?

    1. How much is two cases worth? How many tablets or pounds of chlorine did you add? What type of chlorine was it, stabilized or shock? Did you balance your other water chemistry before adding all that chlorine?

  22. The same thing happens to my pool every year. If there is a substantial storm with heavy rain, soon after the water becomes cloudy and takes several days of shock and chlorine to clear. Other pools in the area do not exhibit the same reactions – any idea why this might be specific to mine ? I have chemical balance tested regularly and it is spot on

    1. If this problem keeps arising, and the same solution is to add chlorine or shock, then it sounds like you don’t have enough chlorine in the pool, to begin with. So when freshwater or maybe somewhat untreated runoff from your deck or lawn seeps into the pool, the low chlorine can’t cope, then the cloudiness begins.

      Runoff from your lawn or garden may have high levels of phosphates, which then leads to cloudiness.

      It would help to have your latest chemistry results to get a better idea of what is happening.

Leave a Reply to Anonymous Cancel reply

Your email address will not be published.

Recommended Resources

PSC Ep. 94: How do I remove pollen from my swimming pool?

In today’s episode of Poolside Chat, Rob and Matt tackle another common swimming pool question:  How do I remove pollen from...
Read Now
Pool Shocks

What is the Difference Between Pool Shocks?

Well first, what is pool shock?  Shock is a concentrated chemical formula used to increase available or free chlorine when your...
Read Now
New Pool Owners Guide

New Pool Owner’s Ultimate Pool Basics Guide

​One thing we would suggest to every new pool owner is to get familiar with pool basics.  This doesn’t mean you...
Read Now
PSC Ep. 55: How to remove oil from pool water?

PSC Ep. 55: How to remove oil from pool water?

In today’s episode of Poolside Chat, Rob and Matt tackle another common swimming pool question: How to remove oil from pool...
Read Now

Looking for pool parts?

Copyright © 2020 INYOpools All rights reserved