Aquarite Salt system Displaying Hi

Pool Equipment
,
1

My Aquarite Salt System is displaying HI and I have to over ride by switching to Super Chlorine.  I have replaced both the Salt Cell and the PCB and aam stumped what to do next.

Thanks,

Tom

2

Hello Tom - The first thing I would check is the cell type in the diagnostics menu. If the T# does not match your cell type, the “HI” message will appear. If it doesn’t match, use our guide titled “How to Change the Displayed Cell Size on an Aquarite SCG”.

Let us know if that is not the issue and we’ll go down another path.

3

The correct cell was selected.  I cycled through the selections again but it is still showing HI.

4

The “HI” message will also appear if the salt level is too high (>3400ppm).

5

The red light that indicates there is too much salt is now lit.  Thanks for your help!

6

You’re welcome!