Back flow

  • 3 Views
  • Last Post 21 May 2019
BobbyS posted this 21 May 2019

I recently purchased a 2" BACK FLOW VALVE For a Pentair 120 heat pump. The rest of the piping for the pool equipment  is 1 1/2". If I use the 2"flow valve and reduce it on the outlet side of the valve will there be any problems with the valve working properly. 

 

InyoRob posted this 21 May 2019

No, there should not be an issue. The flow through 1.5" pvc is capable of opening up the valve.

Close