Bearings and Tune up kit

  • 42 Views
  • Last Post 26 November 2018
Alexaj posted this 12 November 2018

Hello. Please confirm the 5270-36 and 5270-31 bearings and the gokit3 salt are the correct bearings and kit for my Hayward Northstar SP4015X20NS pump with an A.O. Smith motor SP1615ZMNSC. It is a salt water pool. Thank you. 

Order By: Standard | Newest | Votes
InyoRob posted this 15 November 2018

Thank you for contacting Inyo. Yes, the 5270-36 and 5270-31 are the correct bearings for your SP1615ZMNSC motor.

GOKIT3 would not be the correct kit. The GOKIT3 is for a Hayward Super Pump. How old is your Northstar pump? This will help us determine the correct shaft seal.

Alexaj posted this 24 November 2018

Thanks for the reply....not sure how old it is, the label is very worn. I would guess 7+ years. 

InyoRob posted this 26 November 2018

We only have a GOKIT for Northstar pumps manufactured 2003 and prior. You can view all of the available items for Northstar pumps manufactured since 2008 on our parts page.

Alexaj posted this 26 November 2018

I believe it is safe to say it was manufactured around 2008. 2003 would be too far back. I'm not sure if I should be buying the PS4280 seal or the SPX4000SA2. If I'm going through the proccess of replacing the bearings, I'd like to go ahead and do anything else that should be done at the same time. In addition to the 5270-36 and 5270-31 bearings, what else do you recommend? Thanks again for the help, I'd like to place the order today. The squeeling bearings are driving us nuts!

Close