I purchased a home with a Dynasty Pool 16x26, the top rails and caps are all broken because of a hail storm and the liner needs to be replaced also. We are just now getting around to working on the pool. We will need a beaded liner and a complete set of top rails and caps, if you could please help me with this I would appreciate it.
Thanks
Kris Givens
We have a part schematic for a 15’x26’ Dynasty pool but not a 16’x26’. Could you confirm the size? Does it look like the schematic below?
It looks just like that, I called the place the pool was purchased and they said it was 16x26, I can measure it to make sure.
Measure it to confirm and let us know. Maybe they made it for a short time in the 16’x26’ size.
I measured the pool and it was 16’ 2" wide and 26’ 6" long.
I’m following up with the manufacturer to see if I can get a schematic for a 16’x26’ Dynasty pool. I’ll let you know as soon as I get a response.
The manufacturer confirmed that they never made a 16’x26’ Dynasty. Check out the parts on our 15’x26’ Dynasty Parts Page. If the part quantities match, you should be good to order parts.
