hayward aquarite

the readout jumps back and forth between readings and flashes,the led lights for power and generating are the only ones on. the t cell model changes often.cannot reset salt reading, salt level always reads low compared to tested water salt levels. help

It sounds like an issue with the main board. We just had a similar issue with another Aquarite owner. They replaced the thermister and varistors on the main circuit board and it corrected the problem.

We don’t currently sell those components but you can find them at electrical supply shops.

Another option is to replace the complete board. The part number is GLX-PCB-RITE.

Image result for varistor aquarite board