How much condensation should I expect with my new Haywood 140,000 BTU heat pump. It’s been very humid and seems like am getting a lot of condensation. I tested the water no chlorine and nothing when running pump and heater off.
Thanks
Hello Mike - Thank you for contacting Inyo. We contacted a Hayward tech and below was his response.
If no chlorine is found in the water around a heat pump then that is a very good sign it isn’t pool water, but I’d also test the pool’s water for the chlorine level. Not trying to complicate things, but I have seen some very low levels of chlorine or no levels of chlorine at all in a body of water. At high humidity, you can expect a heat pump to discharge as much as one gallon of condensation collected from the air. If the heat pump is turned off for a while and the filter pump is still running, but no water is accumulating around the heat pump then it is a fairly safe assumption that this is not water from the pool’s circulation systems leaking out of the heat pump.
1 Like
When just the pump running and heat pump off no water. I did open up front and see a lot of condensation
Thank you for the update and picture. It does appear that you are experiencing normal condensation.
1 Like
Thank you for your fast reply. The unit we purchased works great and it was a pleasure dealing with your company.
1 Like