I have a Goldline Aqua Rite salt system. It reads salt level is 900 (inspect cell and low salt), but the real level is 2700. I have tried to reset the salt cell countless times, but the instant reading and resetting only goes as high as 1100. Any ideas?
The first thing I would check is that the correct cell type is selected within the control box. Press the diagnostic button until a “T” number appears. That “T” number should match your salt cell. If you have a T-CELL-15, it should say T15 on the display.
Next, I would inspect the cell. There may be calcium build-up. If that’s the case, clean the cell.
If the correct cell type is selected and the cell is clean, it may be time to replace the salt cell.
Check out the Aquarite Troubleshooting Guide for more tips.
1 Like