Just converted to salt with used chlorinator system. Everything looks in great shape. Former owner replaced cell about 2 years ago. Added salt and got salinity to 2.7. Says cell “on” but is showing code 125 and 194.
Should I try muratic acid on cell as stated in manual (2/3 water 1/3 acid). Clean connections??
Hi Lucy,
The Jandy Error 125 and Jandy Error 194 mean…
Jandy Error 125 - Cell needs to be cleaned or replaced.
Jandy Error 194-Cell Current is 85% lower than desired and cell voltage above 19V (generates 125 code - Cell dirty or needs replacement).
Yes we would suggest cleaning the cell and if that does work then replacing the cell with this Jandy 1400 Replacement Cell
Also below is a photo of the troubleshooting steps from Jandy PureLink Troubleshooting Guide
1 Like