I have a Jany/Zodiak LRZ250EN that will not light. It worked fine at the beginning of the year and I can light the burners with a match and the heater works as it should. When I turn the heater on it goes through its safety checks and opens the gas valve. I do not see the igniter glow and it turns off the gas after 5-7 seconds as it should and I can smell the gas. I replaced the igniter assembly and gasket and it did not resolve the problem. I’m looking for help on what I can test upstream from the igniter to troubleshoot the problem.
Hi Scott,
My first suggestion was going to be replacing the ignitor. Pool heater troubleshooting can get quite complex so I would suggest reaching out to the manufacture directly through this link here https://www.jandy.com/en/support