Looking for right "Go" kit for StaRite

  • Last Post 24 February 2020
  • Topic Is Solved
MikeKucharo posted this 16 February 2020

What "Go Kit" do I need for my replacement motor on a StaRite pump? I'm ordering a Century 1 HP QC1102 replacement motor for a fountain/waterfall in my pool. It's a StaRite pump but I don't know the model. It's older and the model identification is no longer visible. There is a small metal plate on top of the 11" flange that has stamped information on it. I assume that has somethisng to do with the model. It's very hard to read but I believe It reads; PJE6G-189L   1D03W

I have attached a photo of the motor and flange that was removed from the pump if that would help.


Order By: Standard | Newest | Votes
InyoRob posted this 17 February 2020

It's hard to say if you have a Sta-Rite Dura-Glas or Dura-Glas II. Do you have a picture of the front end of the pump? 

MikeKucharo posted this 23 February 2020

It is a Dura-Glas II so the Go-Kit79 is the one that works with it.

InyoRob posted this 24 February 2020

The GOKIT79 would go with the Sta-Rite Max-E-Pro.