if I were to take pictures and and measurements of my current caps would that be enough to find suitable replacements? My pool must be at least 20-25 years old and the frame is still in great shape. Changed my liners last summer and the caps are dried out and falling to pieces. It’s a 24’ above ground 48" height pool. Make on the caps are Dolphin.
Thank you for contacting Inyo.
Could you send us the following images?
- Outside Pool Wall (top to bottom)
- Top Cap
- Top Rail
- Top Plate
If you have trouble posting the images to the forum, reply to the email notification with pictures. You can also email pictures to upload@inyopools.com.
So the border is 5". Cap is about 5" for the back part and extra inch with the front insert.
Need 17 of them for a 24" round above ground pool.
We do not carry Flipper top caps but we might have one that will work. Check out part number 1030033F00. I would recommend ordering one to see if it will fit.
Thanks for the reply. I’ll check your sites measurements and remove one cap to compare. As I’m in Canada ordering just one is not an option as I’m travelling Florida in October. So its all or nothing. Just to plan my timing, to get from your stores over to Indian shores. Clearwater area, how long does shipping usually take? I might be able to have 1 shipped before I get there and then re order right away to make sure I get them in hand before I leave. Risky but might be worth it.
We ship those caps out of Orlando. You’d be looking at one business day to get them over to the Clearwater area.
Orlando. Interesting. Do you have a Brick and Motar location in Orlando. I’ll be at Disney Oct 13-20. And Clearwater 20-27. Could actually see them live and bring one of my old ones.
We do not have a brick and mortar location. It’s just the warehouse and they don’t allow customers to visit.