Polaris 360 Pool Cleaner

Hello,

For some reason my Polaris 360 pool cleaner is moving thru the water near the surface vice on the bottom?  The pressure to it is correct and in-line filter clean, have any ideas what would cause not to drive around on the bottom of the pool?  Appreciate the assistance.

The first thing I would check is the thrust jet at the back of the cleaner. The 11 o’clock position will optimize random turning. Also, check the head float and make sure it is not full of water.

After that, check the hoses and make sure they aren’t leaking. Then check the back-up valve to see if it is operating correctly. It should not be consistently spraying water.