I just installed a HeatPro heat pump model HP21404T that I purchased from you. After installing, I noticed a significant lost of suction and pressure lost at the return jets. Is it possible that my Sta-Rite 1 hp pump and 24" sand filter is now to small with the added pipe? I ran roughly 14' of 1.5" pipe to the heat pump. Thinking I should of ran 2" instead. I don't believe I'm going to have the GPM now for the heat pump. Any help would be appreciated.
Pool pump/heat pump
- 22 Views
- Last Post 1 hour ago
InyoRob posted this 1 weeks ago
It's possible that the 1HP pump is now too small. Have you run the heat pump to see if it has enough flow?
Steve1957 posted this 1 hour ago
Problem solved. The impeller was getting built up with debris in the pump. Heat pump is working great.