I have a 30 foot round Canter summer Fun above ground pool. The metal bottom rails measured 55 1/2". I need to repace some of these bottom rails because they were rusted when we took the pool down. I am also looking for replacement resin caps. I believe the pool is 10-12 years old. And I also need help in figuring out what size pump I need for this pool. Thanks Tabby
Pool replacement parts
- 187 Views
- Last Post 22 June 2018
Hello Tabby - The Summer Fun name was placed on a few Cantar models. We'll need to identify the exact model. Can you supply the following images?
- Outside Pool Wall (top to bottom)
- Top Cap
- Bottom Rail (end view)
- Bottom Plate
You can post the pictures directly to this forum or reply back to the email with images.
If your pool has a total of 20 bottom rails, the part number is 1255630.
We'd recommend a 1.5HP pump for a 30. Something like the Hayward model SP1580X15 would be a good option.
Are you sure the pool is 30' and not 27'? The 27' models require 18 of each.
The lady said 30 foot but there are only 18 of each and they measure 55 7/8” long. I took it down but it did not measure it up.
Thank you very much I will order these parts. And do you still recommend the same pump?