Pool Spa Renovation

Pool Equipment
1

Hello,

I recently purchase a house and I’ve been renovating the pool and linked spa. I need some help finding some parts I need to replace: 1) the right spa light, and 2) the Jet caps.

The pool is old, but everything is in working condition, including the jets and the electricity going to the Spa Light. However, given that the pool is older, I’m having a hard time finding the right replacement equipment.

  1. Light: I’m looking for a 12v Spa Light. I see different models ranging from 200-500 in your page. I’m not looking to have a light show, a simple white light would do. Attached is a picture of the old light fixture, which I believe is a Pentair (?). Could you please recommend a couple of options?

  2. Spa jets: I need jet caps of this size (picture attached). This old model I can’t find anywhere !(file:////Users/a206107399/Library/Group%20Containers/UBF8T346G9.Office/TemporaryItems/msohtmlclip/clip_image001.png) Do you sell a cap of the same size that can be screwed onto the jets?

Thanks so much for the help!

Spa Light
Spa Light1024×1023 136 KB
Spa Light
Spa Light848×1024 93.3 KB
Spa Light
Spa Light768×1024 56.6 KB
Spa Jet Cap
Spa Jet Cap1024×768 53.7 KB
Spa Jet Cap
Spa Jet Cap768×1024 41.8 KB

2

It looks like it could be an old Pac Fab spa light. Those can be replaced with the Pentair SpaBrite. We have a 100w 12v light with a 50’ cord. The model number is 78108200. There are other options for longer cords. Click Here to View the SpaBrite Light Fixture

The spa jet looks like a 1.5" MIP fitting. We have one option with a rotating eyeball. The part number is 3727W. Click Here to View the Rotating Eyeball Assembly

A simple directional eyeball fitting would be part number 3722-0. Click Here to View the Directional Eyeball Fitting

3

Thank you Rob, however the fitting is 2 1/4 (and a quater) in diameter.

The Inlet Eyeball is slightly smaller (2’) so I suspect it wont work. This must be an old school cap…any other solution you would recommend?

4

Is the outside measurement of the threads 2-1/4"?

5

Correct

6

I’m reaching out to a couple of our vendors to see if they have one that is 2-1/4". I’ll let you know as soon as I hear back.

7

The closest we can find is part number 55-470-1820. Click Here to View the Hydro Jet

Face Diameter   3-3/8"

Base Diameter  2-3/8" w/Threads

Total Length       1-1/2"

1 Like
8

Thank you…that looks very very similar!!

If I order, can I return them if they dont fit?

9

Yes, we’ll take back any unused items. There is no restocking fee.

1 Like
10

Thanks for your help. I just purchased.

1 Like
11

That is great! Thank you for shopping with INYOpools.