Pool Valve Outside Coupling

My pool plumbing uses Jandy control valves.

They are currently plumbed using 2" PVC which is inserted into the valve.

I need to replumb a couple things and there is not enough 2" pipe to cut off and attach.

I would like to cut off the 2" pipe going into the inside of the valve and  put a new connection around the outside of the valve.  The outside of the valve measures 3" OD.

Do you sell a coupling or reducer (down to a 2" PVC pipe) that I could put on the outside of the Jandy Valve?

Any guidance appreciated!

Dwight Martin