My pool pump motor recently died (humming noise). I took it to a local pool store and the tech told me that it is not the capacitor and that I would have to replace the motor.
The label on the motor says it is a Emerson SQ1202 2Hp 48Y. Unfortunately, IDK what Jandy pump model is; the label is completely worn out.
What replacement motor may I use? I would prefer replacing with an Emerson SQ1202 or exact equivalent (AO Smith makes an SQ1202?) but if there are better suggestions, I am all ears. Looking forward to any inputs and advice.
Hello Kartic - We would recommend the Century SQ1202. If you post a picture of your complete pump, we can identify the pump model. At that point, we can recommend the correct replacement seals.
Thank you for the pictures. In the last picture, what is the serial number on the sticker? You may not be able to read the whole thing but the beginning should be enough to determine the seals.
We strongly recommend replacing the shaft seal. You may risk water leaking into the new motor if you use the old shaft seal. We have an informative article titled “Why Should I Change My Shaft Seal”.
Got the replacement parts. You guys are FAST! Thank you.
I am stuck in a predicament - I am unable to get the old motor separated from the pool plate; can’t get the impeller out. I am unable to lock the motor shaft in order to unscrew the impeller. I watched your video on how to remove it but I am unable to lock the the shaft in place with a screwdriver as described.