Salt Water

  • 36 Views
  • Last Post 3 weeks ago
  • Topic Is Solved
Akasiep posted this 3 weeks ago

Switching over from Chlorine pool to salt water, is there anything that I have to do with the pool pump motor with the conversion? Thank you

Order By: Standard | Newest | Votes
InyoRob posted this 3 weeks ago

I would recommend installing a heavy duty shaft seal. What is the make and model of your pool pump?

Akasiep posted this 3 weeks ago

AO Smith 1.5 hp item B854 purchased through inyopools

InyoRob posted this 3 weeks ago

The B854 motor is used on several pumps. We need to know the make and model of the pump side.

Akasiep posted this 3 weeks ago

sta rite pool pump PAE6F-188L

InyoRob posted this 3 weeks ago

There should be a number between the P and the A at the beginning of the model number. Does it say Max-E-Pro somewhere on the pump?

Sta-Rite Max-E-Pro 1 HP Up Rate Standard - P6RA6E205L

Akasiep posted this 3 weeks ago

Sorry actually should be P4E6F-188L

Akasiep posted this 3 weeks ago

Nothing about Max E Pro

InyoRob posted this 3 weeks ago

The P4 series is the Dura-Glas II. The heavy-duty shaft seal is part number 35-423-1096.

Akasiep posted this 3 weeks ago

Thank you 

  • Liked by
  • InyoRob
InyoRob posted this 3 weeks ago

You're welcome. Thank you for visiting INYOpools.com.

Close