Sand tank

I have a 24’x52" round above ground pool. We have a Mighty Mammoth 2.0 hp, HAP1500 pump. The filter is a model# SF60110 sand filter. Just recently patched a crack in the bottom of the tank about 1". Was this caused by to much pressure from pump and if so will a larger tank work or should we get a smaller pump.

The SF60110 is an Intex brand filter. They are not known for making the highest quality product. I would recommend keeping the pump and upgrading the filter. We’d recommend something like the Pentair Sand Dollar model SD60.

Sand Dollar w/ 6 Way Valve - 145322" width=“468” height=“468”>

So we could not get a different tank and keep the same valve on top?

No. I believe your filter is the largest version of that Intex SF Series. I don’t think there is another option.