Spa light Replacement

I need to replace my Hayward Spa Light fixture. Please look at the picutres and let me know what model I need. I would like LED. Also, is there a special tool to remove housing or wire inside the spa. The wire is tightened and it looks like you need a specail tool to loosen the wire from embedded housing.

Thanks

Dinesh

Hi Dinesh,

Thank you for the photos. I suspect you have this Hayward Astrolite II SP590 Series Light Could you take a measurement of your glass lens it should measure approximately 3.6" in diameter. If so then you can go with either of the following lights, you will need to determine if you have 12V or 120V and if a 50’ cord will be long enough for you.

In regards to replacing your light, you will need to pull the entire light fixture and cable out from your old niche. We put together this Video on How to Replace a Pool or Spa Light which shows the process. No special tools are required, unless you want to invest in a fish tape, some people use twine, wire or old light cable instead.