Spa pump motor

  • 168 Views
  • Last Post 22 April 2019
LarryO posted this 19 April 2019

Old motor has open winding, for a sundance optima spa. Need replacement. Old one 2.5 hp 2 speed with klixon Thermal overload protector and v switch and govenor with both start and run capacitor. It appears the B2984 comes the closedt to replacing this old motor. My question, old motor wiring diagram has red connected to A(low), black connected to Hi( L1), white common to (L2), do i connect red wire to low or high in new motor. Seems new motor doesnt have swith and govenor. Old motor ha no exterior switch to run high or low speed. This on control board at edge of spa. Hope you can assure me the B 2984 will work

Order By: Standard | Newest | Votes
InyoRob posted this 19 April 2019

Hello Larry - Can you post a picture of your motor label and a picture of the complete pump?

LarryO posted this 19 April 2019

The motor is at shop right now. Will send pictures as soon as pissible. Thanks so much

  • Liked by
  • InyoRob
LarryO posted this 22 April 2019

Hopefully you got the pictures

InyoRob posted this 22 April 2019

We did not receive the pictures.

LarryO posted this 22 April 2019

Did you possibly get these pictures

InyoRob posted this 22 April 2019

No pictures were posted to this thread. Try emailing them to upload@inyopools.com

Put "Attention Rob" in the subject line.

LarryO posted this 22 April 2019

I sent a new set of pics

InyoRob posted this 22 April 2019

You have an uprated 2.5HP 2-speed Sta-Rite Dyna-Max. The replacement motor is model SQS1202R. That is a 2HP 2-speed full rated motor. It will wire up the same way as your existing motor.

Close