Hi guys. I’m still quite green but I’m learning. I wanted to ask about how many hours at a time should my salt generator be on? It comes on with my pump currently but some of the programs are 2 hours long at only 1000 rpm. Here is the current pump schedule:
1200 to 2 am- 1725 rpm
2am to 4 am - 1000 rpm
8am to 10am - 2400 rpm
12p to 4p - 1000 rpm
6p to 10p - 1725 rpm.
at this time the salt generator is powered every time the pump runs and so does heater. Heater and salt generator are on their own timer control but time is synced to match pump timer. I took the advice from this forum and used a programmable timer for heater and salt generator system. I have a t-15 with crystal pure control I bought here, as well as my raypak heater came from here. Any help would be appreciated. System is on, just fired it up 2 days ago. I added 13 bags salt and I’m at about 2600 ppm According to gen control. Last question, when I test water manually, what shall I test besides ppm salt? My first pool, but I’m no dummy. Thank you