Unsure of parts I need

  • 37 Views
  • Last Post 2 weeks ago
Bryan5855 posted this 13 June 2016

I'm not sure what parts I need since I can't clearly make out the model number on my valve head or filter body. The most I can make out is its the SS240 model filter. The issue I'm having is my handle for the valve head is super loose and I don't think it's sealing properly inside because I'm losing water through the backwash port no matter which way the filter is set. So my question is could it be a bad spring and spider gasket? Would I be better off just replacing the entire 7 way valve? If so can you give me and idea on what specific parts I'd need?

Order By: Standard | Newest | Votes
Service posted this 13 June 2016

Hi Bryan,

If you have a Jacuzzi SS240 sand filter then you can view all the parts for your filter on our Jacuzzi Splash Pak SS240 Parts Page I would suggest replacing your entire valve. The SS240 uses this Jacuzzi SS240 Backwash Valve by replacing your valve with this valve you should be back in business.

Thank You

Patrick

www.inyopools.com

Thank You

Patrick

www.inyopools.com

Bryan5855 posted this 14 June 2016

Yes it's the flopro SS240 sand filter made by jacuzzi bros. Awesome I'll check those parts out now, thanks for the help

Service posted this 14 June 2016

Thanks Bryan!

Thank You

Patrick

www.inyopools.com

LamarChilli posted this 2 weeks ago

I have a Purex Triton sand filter and it has a Pentair SM-20-3 model SM2-PP3 2" Multiport valve. I need to know what repair kit I need. My valve has a spring plus all gaskets . kits I have seen don't have the gasket. my numbers on the valve have come off in some places so I think the ones I gave you are correct. Can you help me get the correct repair kit.

Thanks,

Mark

Close