Part # OARF-36EL9
Alternate Part #'s 25587-330-900, CMP25587-330-900
The Rainforest Fall features a soft, rain-like texture and a tranquil, mesmerizing sound. This waterfall has a width of 36 inches and a lip size of 9 inches. All Rainforest Falls are backfeed. The 36-inch waterfall requires a pump that can provide 15 gallons per minute (GPM); pump is sold separately.
The Rainforest Fall is also available as the Starlight Fall which has fiber optic cable attached to create a beautiful illuminated waterfall. For more information on the Starlight Falls, click here.
To learn more about waterfalls and installation, please see our Waterfall Guide.
The Rainforest pool waterfall comes in a choice of 8 different sizes, with 4 lip sizes. Below is a chart of the different sizes available for the Pool Waterfall and also shows the dimensions of the actual waterfall.
For more information about installing PVC Pool Waterfalls click here.
For more Pool Waterfalls click here.
Is this waterfalls only for inground pools? Can it be used on a kayak style pool
Reply
Hi. These waterfalls although commonly used with swimming pools, they're not limited to that application as long as it is installed according to the manufacturer specifications. Yes, it can be installed on a Kayak pool.
Reply
Less than 1 hr
80 grit sand paper and J-B weld water weld
Materials:
1: 80 grit sand paper.
2: J-B weld epoxy putty.
Start off by sanding the affected corner and go an inch past the affected area. Prepare a good amount of putty and paste over the sanded area... if leak continies prepare more putty and spread past the sanded surface.