By Sophisticated Systems Inc


Details

Top

Model # 1200

Availability Note: This Product Cannot Ship To Canada

Product Description

The New Uniclor Model 1200

  • The UNICLOR converts salt into its two basic elements: chlorine and sodium. A 40 pound bag of water softener salt contains 24 pounds of pure chlorine. This is the same amount of chlorine contained in 37 pounds of calcium hypochlorite or 55 gallons of household bleach.
  • The UNICLOR cell is divided into 2 chambers. An 80 pound bag of salt is poured into one chamber and water is added to the second chamber. The new UNICLOR does not use a membrane which was used in the older models, the absence of the membrane allows the water to flow between the chambers dissolving the salt making it salt brine.
  • No hazardous material is handled or stored.
  • When the pool pump is turned on, the power supply sends a low voltage DC current to the cell at a power level selected by turning a knob.
  • When the salt brine is electrolyzed, the chlorine and sodium are seperated. The chlorine bubbles up through the salt solution and is drawn from the cell with a vacuum created by the venturi. The sodium is drawn to the cathode where it becomes 3% sodium hydroxide solution which is mixed with the chlorine and drawn from the cell by the venturi to help balance the pH.
  • Seperation of the two solutions is maintained because they are two different densities. The sodium hydroxide is lighter than the salt brine and therefore "floats" on top. The anode is in the salt brine and the cathode is just above the salt brine in the sodium hydroxide solution.
  • Effectively chlorinates an average 20,000 gallon pool

System Components

  • System contains Power Supply, Cell & Venturi
  • Includes Associated Fittings & Tubing

Sanitizing Capacity

  • The UNICLOR model 1200 will provide chlorine necessary to sanitize most residential pools up to 20,000 gallons.

Maintenance Requirements

  • The average residential pool will use three to four 40 pound bags of salt per year. Consumption will vary according to bather load and weather
  • A simple electrode replacement may be necessary after 3 to 6 years of residential service. More frequent service my be required in commercial applications.
  • The UNICLOR system can be configured to accommodate almost any water treatment application. The system configuration will dictate the exact maintenance required.

Cost of Operation

  • In addition to salt and anodes the UNICLOR system requires electricity, approximately 1.8 KWH per pound of chlorine produced. Total operating costs for a normal residential pool is about 11 cents per day.

System Specifications

  • Voltage: 120V/240V
  • Input: 2 amps @ 120V, 1 amp @ 240V
  • Output: 8.5 volts DC

Product Specifications

Pool Size:
Up to 20,000 gal.
Volts:
120V / 240 V
Top
?     Asked on 6/27/2011 by Guest

What makes up the "cell" in this unit and is this "cell" used in each of the three models - 600, 1200 and 2400
 Reply

A  Answered on 6/27/2011 by InyoPools Product Specialist Patrick P.

The "cell" for these units is composed of two parts: the cathode kit (item 2500-23) and the anode kit (item 2500-22). This pair is used in all three models.
 Reply


?     Asked on 6/13/2015 by Bob

I have had the unichlor 1200 for several years. When I installed it the salt recommendation was for Morton yellow bag pellets. Morton has changed the formulation of the pellets to add some better results as a softener salt. Do you know if this new formulation affects its use as a chlorine salt?
 Reply

A  Answered on 6/20/2015 by InyoPools Product Specialist Patrick P.

Hi Bob, The salt must be at a minimum of 96.6 % pure so as long as the new Morton formulation meets these standards you are fine. You can also use the Gems brand.
 Reply


?     Asked on 4/7/2016 by Dick

My Uniclor model 600 power supply has failed. Where can I get a new one?
 Reply

A  Answered on 4/7/2016 by InyoPools Product Specialist Alan M.

The  Uniclor model 600 power supply is no longer available. We do carry Uniclor Power Supply Parts for repair.
 Reply


?     Asked on 5/31/2019 by Michael Kraynak

Looking for an old ANTHONY in-line Venturi...about 11” long, PN 001-3401, I think. Thanks.
 Reply

A  Answered on 10/2/2019 by InyoPools Product Specialist Steve M.

Michael, the replacement venturi for your PN 001-3401 would be the Venturi, Model 500 With Fittings (001-3404)
 Reply