I have an American Products 120V spa light that needs replacing. The label on the light is mostly unreadable; the only number I can read is 7824XX. The pool is gunite. The housing (niche) for the light has a label that states the following:
Model SN750 Fixture Housing (Concrete)
Model SNL750 Fixture Housing (Prefab.)
The light has an R-20 100W incandescent bulb. The light's glass lens is 4-1/16" O.D. & the outer ring around the lens is 6" O.D.
What light should I order to replace this one?
Reply
Hi Tom, This Pentair AquaLight can replace your current light and will also fix into your existing niche.
Reply
Hello I have a spa light fixture I need to replace .
the only numbers i see is 7824XX , 792066.
On the back of the fixture NO. R-831543
Using a light bulb 250 watt , 120v , T-4 bulb PAC FAB
please help me order the correct fixture for my spa thank you
Reply
Hi Frank, Based on your part #'s you will require this 120V 250 Watt Pentair Aqua Light.
Reply
Hi, I have an American Products 7810XX series spa light that needs a new gasket and a bulb, is this the correct part list? Thanks!
Reply
Hi, Matt. To view the list of available replacement parts for your model fixture, use the SpaBrite & Aqualight Parts Diagram.
Reply
what is the diameter of the outer ring,,and can I buy just the light assy ?
Reply
The diameter of this ring shows as approximately 5.75 inches and you can order the light assembly. Please keep in mind that may be a special order.
Reply
SpaBrite pool light 77111100, does it come with longer than 15’ cord? Also...could I put a 60w bulb in it...if I choose to?
Reply
Hi Bill, please see our Pentair Spabrite light options and the 12V models use 100-watt bulbs.
Reply
