How Does a Swimming Pool Work?

The cool thing about a swimming pool is they all work in the same manner. No matter the size, shape, or added features, they all use a combination of filtration and chemical treatment to consistently keep the water clean and healthy. But really, how does a swimming pool work?

As a new pool owner, you might not have a handle of the ‘ins’ and ‘outs’ of your pool yet, and that is okay.

How a swimming pool operates.
How a Swimming Pool Functions

There are two different types of pools, above ground and inground.  Aboveground pools are the cheapest construction option and the easiest to construct as well. They are typically made from prefabricated kits and are easily installed by a pool professional. On the other hand, in-ground pools are made from gunite, concrete, fiberglass, or vinyl liner. While the design of these pools is different, they all rely on the same basic plumbing and filtering system.

The Flow of Water

Water in a swimming pool needs to circulate through a filtering system to remove dirt and debris. During normal operation, water flows through the filtering system through two or more main drains at the bottom of the pool and multiple skimmers around the top of the pool. In your pool, the water is pulled through the main drain, the skimmer, and the vacuum port. Skimmers collect and skim water on the surface by propelling the water and screening out the largest debris in the strainer basket. This allows for an evenly heated pool and uniform chemical treatment.

Afterwards, it is sent through the pump, the filter, the heater, and then returned back into the pool through the return fittings. You may need to add an additional pump for waterfalls and jets.

Your Pump and Filter

In order for a swimming pool to be free from algae and other harmful contaminants, the pool must have a working filter. However, without a pump, your filtering system will not work and your pool will get too dirty to use.

The Pump

Pool pump parts
Pool Pump Parts

The heart of the pool system is the pump. The electric motor on the pump spins the impeller inside the housing and drives the water from the various drains. Once the water is pulled through the skimmers, it flows through the wet end portion of your pool pump. The wet end portion of your pump includes the strainer lid, strainer o-ring, strainer basket, diffuser, impeller, and a shaft seal. The water passes through the pump and out of the discharge of the pump into the filter.

The Filter

During the filtering operation, the dirty water from the pool comes through the filter’s inlet pipe and heads to the water distribution head inside the tank. As gravity pulls the water down, depending on the type of filter you have, either sand, cartridge, or diatomaceous earth catches the dirt and debris. Pressure gauges at the inlet and outlet give you an idea of how much blockage the filter currently has. If gauges show much greater pressure on the inlet pipe than the outlet, it is an indication there’s a lot of collected debris and it is time to backwash or clean your filter cartridges.

Balancing Your Pool Water

Although the filter system handles all the hard work in keeping your pool water clean and healthy, water chemistry handles all the fine touches. A healthy chemical balance is essential to not just your pool but also to the rest of your pool equipment. A pool filled with untreated water is a perfect harvesting place for pathogens and other disease-carrying microorganisms. Pools with the incorrect chemical balance can damage other parts of your pool, irritate your skin and eyes, and cause your water to become very gray and cloudy. Thus making your pool experience a rather unpleasant one.

Chlorine

The most popular disinfectant is chlorine. When chlorine is added to the water, it reacts with the water to form various other chemicals. Chlorine is typically prepared in liquid, powder, or tablet form. Pool experts generally recommend adding chlorine just after the filtering process, using a chemical feeder. If added directly into the pool, chlorine tends to be too concentrated in certain areas and not evenly distributed.

When chlorine reacts with water, one of the most notable chemical reactions is hypochlorous acid. One problem with hypochlorous acid is that it is highly unstable. It degrades when exposed to sunlight and may combine with other chemicals to form new compounds. Often times chlorinators include a stabilizing agent, like cyanuric acid, that will form a more stable compound once it reacts with the chlorine.

Heating Your Pool

No one likes to swim in a dirty pool or a cold one for that matter. Swimming pool heaters have increasingly become very popular and a “must have” for pools in certain areas in the country. There are various methods to heat your pool: heaters, heat pumps, solar panels, or solar covers. Many of our customers use a combination of these to reach the maximum heat potential while using the least amount of energy. Still, pool heaters are the most popular. Both propane and natural gas pool heaters are good for heating a pool quickly and are able to maintain a constant water temperature.

How Heat Pumps Work
How Heat Pumps Work

Heat Pumps

Pool heat pumps are a more efficient, environmentally friendly way to heat a pool. It can save a pool owner a lot of money in operating costs, however, unlike gas heaters, a heat pump’s effectiveness is dependent upon the weather. They operate by extracting heat from the outside air, increasing the heat with a compressor, and then delivering the heat to the water. If the temperature is below 45 degrees, the heat pump will not function. So, depending on the average temperature of where you live, a pool heat pump may or may not be the best choice for you.

Gas Heaters

Gas heaters create a flame on a gas burner that heats a metal heat exchanger. Once your pool water flows through the filter it ends up at the heater next. Gas burns in a combustion chamber that heats the water as it passes through. Over time, the circulated pool water will warm up and maintain a constant temperature

The longevity of each pool equipment varies from pool to pool depending on your location, how often you run each system, and also the water chemistry in your pool. We offer an extensive list of how to guides for pool owners that provides step by step tutorials and videos to help you along the way. Remember, when in doubt, call a pool professional. There is nothing worse than spending money to fix something that could have easily been solved from day one.

21 thoughts on “How Does a Swimming Pool Work?

  1. You can get just about any size or depth you prefer. Most home pools that are inground are around 1-1/2′ at one end,to 8 or 9′ deep or more on the other… limited only by your money and imagination….

  2. Hello, my pool has filled up too high. The water is over the filler float and the float seems work properly as there is no water flowing in and when i push it down you and hear it run and then stop when I release. Do I still have a float problem? Thanks

  3. The door to my skimmer stays laying flat so debris can just escape, will replacing the door fix the issue or is it something else?

  4. My built in pool has been losing water though the drain and skimmer. I know this because i blocked one at a time and the water has maintained the same level once both were blocked. I lose 3-4 inches of water per day without any filtration running. Could I have a sump pump that I do not know about? Or another problem?

    1. It sounds like the leak in either both pipes or in a connection where both pipes meet. There would not be a hidden sump pump on a pool system.

      If you are losing 4 inches of water a day, I would have someone come out and take a look at the pool asap.

      1. How do we find the leak and get it fixed? Does it involve tearing up the surroundings, then having to build them back, or are the pipes installed so they can be reached without doing surgery on the pool itself or the surface around it?

    2. Am have this exact problem now. What was your final solution to determine where your leak was coming from and how? Thank you

  5. I have 2 holes in the skimmer. One is the suction but I don’t bknow what the bother one is for. It doesn’t have any suction so what doors it do???

    1. The second hole is the equalizer line; it is meant to help prevent the pump from running dry. If the water level drop below the skimmer opening, the equalizer line draws in water to keep the skimmer filled and the pump supplied with water.

      pool skimmer equalizer line

  6. This is a great article about how pools work. My brother put in a pool at his home this year. He likes swimming in it after work each day. Also, his kids invite their friends over to swim. How deep are most pools?

Leave a Reply

Your email address will not be published.

Recommended Resources

Is my pool heat pump leaking?

PSC Ep. 69: Is my pool heat pump leaking?

In today’s episode of Poolside Chat, Rob and Matt tackle another common swimming pool question:  Is my pool heat pump leaking?...
Read Now

Should I run my heat pump during the day or at night?

March 28, 2019
Should I run my heat pump during the day or at night? In this video, we take a look at whether...
Watch Now
Parts of a Pool Pump

Identifying Major Pump Parts and Their Functions

A person who has had the pleasure of seeing the innards of a pump (opened by their own hand or glancing...
Read Now

Looking for pool parts?

Shop Motors Shop Filters Shop Pumps Shop Salt Systems Shop Lights Shop Cleaners
Copyright © 2024 INYOpools All rights reserved