Super Vision Illuminator SV250T

  • Last Post 21 January 2021
Troyayers posted this 16 January 2021

I have a Super Vision Illuminator SV250T fiber optic lighting system that's >15 years old.   I can't find much information on line about this unit am looking for advice for replacement parts or just swapping the unit out altogether.

The fan and lighting assembly are melted due to the previous owner using the wrong bulb in the unit.  The motor won't spin either.

Appreciate any input!

Order By: Standard | Newest | Votes
InyoRob posted this 18 January 2021

Most of the parts for that unit have been discontinued. We only carry one complete illuminator and that is the Fiberstars 6004. Click Here To View More Details on the 6004 Illuminator

We don't have any alternatives for perimeter lighting but we do have options for the end view lights that would be under the water. There is a CMP Brilliant Wonders light that will thread into an existing fiber-optic lens housing (1.5" wall fitting). You'd pull the old fiber optic cable out and then feed the new line through and connect it to a transformer.  Click Here to View More Details on the Brilliant Wonders Light

Custom Molded Products Brilliant Wonders 1.5in LED Flush Gunite Fitting Light Kit - Color (100ft Cord) - 25503-568-109J

Troyayers posted this 21 January 2021

Thanks for the information.  For the Brilliant Wonders Light, it says a 12V transformer is you sell these or can you provide a reputable unit?  Also, there aren't any reviews for this particular product - do you know how powerful/bright these are compared to the 6004 Illuminator?  A couple of reviews state it is much dimmer than expected.  Thanks!

InyoRob posted this 21 January 2021

The transformer we recommend is the Intermatic PX100.

I have a 14'x28' pool with a light surface and have two of these lights along one of the long sides. They sufficiently light my pool. These may not work if you only have one light and the pool is large.