How To Replace the Tires on a Polaris ATV Suction Cleaner

WRITTEN BY:  Inyo Pools

  5 out of 5 stars on 1 ratings
(Click on a star to add your rating)

After daily use, the Tires on your Polaris ATV Suction Cleaner will wear out and have to be replaced. This guide shows you how easy it is to replace these Tires.

Step by Step

Top

Step 1

ORDER PARTS - The first step is to order the parts you will need. The only parts you may need for this procedure are the three Polaris ATV Suction Cleaner TIRES. The prices quoted are per Tire.

Step 2

REMOVE TIRES - Turn the Polaris ATV Suction Cleaner on its side. Now peal the tire off the Wheel Assembly. The Tire should come off easily on either side of the Wheel Assembly rim.

Step 3

REPLACE TIRE - Wrap the new Tire onto the Wheel Assembly. Check to make sure the Tire is evenly applied on the Wheel. Repeat for other two Tires as required.

Step 4

REPAIR IS COMPLETE - That's all there is to exchanging a Tire Your Polaris ATV Suction Cleaner is ready to go.

Comments

Top

Be the first to add a comment