SP715 Multi Port Valve Tune Up Kit (NO SPRING) - APCK1034

$33.99

IN STOCK
FREE SHIPPING

Part # APCK1034

  5 Average  

Details

Top

Part # APCK1034

Product Description

Kit Includes: 3: O-rings, 1: Gasket(s), 1: 6 Gram Silicone Packet

Top

?     Asked on 6/19/2019 by Larry

I purchased a SP715X62 2" vari control valve spider gasket and am ready to install. I noticed in your video that some spider gaskets require locktite but mine came with silicone and e6000. Does the e6000 go under the gasket like glue and the silicone on top of the gasket. Your video states that some spider gaskets work with locktite. Thanks, Larry
 Reply

A  Answered on 6/19/2019 by InyoPools Product Specialist Hector F.

These gaskets can also be secured by using silicone.
 Reply


?     Asked on 3/30/2019 by Michael

is this kit for the SP715XR50
 Reply

A  Answered on 3/30/2019 by InyoPools Product Specialist Lennox H.

Hi, Michael. Yes, this kit will work with the SP0715XR50 valve. 
 Reply


?     Asked on 1/15/2019 by Terry

I need to rebuild 2 SP0715X62 Vari-Flo valves. Could you tell me the part # for the rebuild kit?
 Reply

A  Answered on 1/15/2019 by InyoPools Product Specialist Lennox H.

Hi, Terry. This SP715 Multi Port Valve Tune Up Kit - APCK1034 includes all of the gaskets for your model valve. You can also purchase the Cover & Handle Assembly - SPX0715BA3
 Reply


?     Asked on 9/1/2018 by Larry

I am looking at ordering a tune up kit for SP-715x62. Is the silicone that comes with the tune up kit enough for the spider valve or do I need to order the tube of silicone?
 Reply

A  Answered on 9/1/2018 by InyoPools Product Specialist Lennox H.

Hi, Larry. The tube that is included will be enough to lubricate all of the seals. You can also purchase another tube of Magic Lube to have some on hand. You will also need to get the Adhesive if you don't have any.
 Reply


?     Asked on 8/6/2018 by JP

Is this kit compatible with the s310t2 model?
 Reply

A  Answered on 8/6/2018 by InyoPools Product Specialist Lennox H.

Hi, JP. This kit is compatible with the valve used with the S310T2 model filter. 
 Reply


?     Asked on 7/8/2018 by Larry

I have a Hayward Pro Series High Rate Sand Filter Model S-310-S with a SP715x62 2"Vari Control Valve Assembly with guage. I have sand in our inground pool and wonder if this could be caused by a bad spider gasket? I notice some water accumulation at the top of the valve. Earlier this year, I replaced the the bottom elbow assembly and the the lateral holder assembly and replaced the sand.
 Reply

A  Answered on 7/8/2018 by InyoPools Product Specialist Hector F.

Yes, this could be caused by a bad spider gasket or by bad parts within the filter. I.e. the laterals. It may be time for a good inspection of the internal parts of the filter if you replace that gasket and still, and sand is returned to the pool. 
 Reply


?     Asked on 6/19/2018 by David

Is the spider gasket for the Hayward SP715 valve supposed to be glued down like on other models? Thanks.
 Reply

A  Answered on 6/19/2018 by InyoPools Product Specialist Hector F.

I would recommend using RTV silicone
 Reply


?     Asked on 5/9/2017 by

Leaking water through the top of the value where the handle is connected to the value. What parts do I need to correct the program?
 Reply

A  Answered on 5/10/2017 by InyoPools Product Specialist Hector F.

More than likely the washers and small o-rings in this kit are what you will need to replace to stop the leak.
 Reply


?     Asked on 4/16/2017 by David

My pool is losing water thru the waste line leading to street when filter is running. If I replace the valves' spider gasket & O-ring will this fix my problem? Was looking to purchase the APCK1034 kit.
 Reply

A  Answered on 4/17/2017 by InyoPools Product Specialist Scott W.

Yes, if it is leaking out of the ports of the multiport valve then the spider gasket is what you want to replace. What is the valve part number so I can recommend the correct spider gasket.
 Reply


?     Asked on 7/21/2016 by Gary

My Hayward valve is leaking The number on the valve is 3640310. What part do I need?
 Reply

A  Answered on 7/23/2016 by InyoPools Product Specialist Alex V.

Gary, If it is a Hayward valve, it should have a model number that begins with "SP". Can you please confirm the model number?
 Reply


?     Asked on 7/7/2016 by Bill

Hello, can you tell me if this kit will fit an SP740DE Hayward selecta flo valve? And if I want to replace the spring as well? Which kit would I order.
 Reply

A  Answered on 7/12/2016 by InyoPools Product Specialist Lennox H.

Hi Bill, This kit will not fit the SP740DE valve. There is not a kit available for this valve, you will have to purchase the parts individually which all can be found via the Hayward Multiport SP740DE 2" Parts page.
 Reply


?     Asked on 6/7/2016 by Pantelis

Is this suitable for the SP071620T? If not, is there a list of parts that can be used for that model that you guys have in stock?
 Reply

A  Answered on 6/7/2016 by InyoPools Product Specialist Patrick P.

Hi Pantelis, Yes this is the correct tune-up kit for the Hayward SP071620T valve. We also carry this SP071620T Tune Up Kit With the Spring.
 Reply


?     Asked on 5/5/2016 by Karl Hertlein

I have a De filter and would like to know what the six positions each are for??
 Reply

A  Answered on 5/5/2016 by InyoPools Product Specialist Alan M.

Hello Karl, Here is an easy How To video on all of the features of the Multiport valve. How a Multiport Valve Operates. Just click on the provided link!
 Reply


?     Asked on 5/5/2016 by KARL HERTLEIN

what do each of the 6 settings do ??
 Reply

A  Answered on 5/5/2016 by InyoPools Product Specialist Alan M.

Hello Karl, The six features of a Multiport Valve include Filter, Waste, Closed, Backwash, Recirculate, and Rinse. Each has a specific function depending on if you have a Sand or D.E. filter.
 Reply


Top

Review Summary

 (Average 5  out of 5 stars)
3 Rating
5 star:
 
(3)
4 star:
 
(0)
3 star:
 
(0)
2 star:
 
(0)
1 star:
 
(0)

The Most Recent Reviews