Part # 52201000
Part # 52201000
Alternate Part #'s 1112, 30239, 4005640, 894021100, AQF1014865
Pump Union, 1-1/2" FBT x 1-1/2" S
I have an aquacomfort pool heat pump model 100, the union cap is cracked, will this fit?
Hi, Chris. Unfortunately, I'm unable to confirm if these Pump Unions are compatible with the Aquacomfort Pool Heat Pump. You will need to reach out to an Aquacomfort parts dealer.
valve is a Pentair 261186 for Sta-Rite CristalFlo High-\Rate Pool Spa Sand Filter. I have plumed the previous valve direct and had no unions on it which means I will have to cut the piping in order to rearrange to piping to match the new valve as it has a different location for the pump and filter than the older model. Current piping I have is 1 -1/2 inch PVC. I am considering using Pump Union, 1-1/2" FBT x 1-1/2" S - 52201000 for repairs. Will these match the diameter of my current PVC piping
I own an old Baker II Filer Model HRV-24 ser no. B20217. There are two 1/2" unions on the side for flows. The cap of one of the unions got cracked. Does this union cap would fit to this model?
Hi, Kyung. This union will not fit the Baker Hydro HRV-24 unit. The correct union is p/n 31B0077.
looking for 1 1/2 inch female/slip union
Hi, Bill. This union does have a 1-1/2" slip tail end and female buttress thread.
I have a VMC JS4200D pump and need new PVC plumbing unions What are the correct unions for this unit?
Hi, Bob. I was not able to find any info on the pump that you have so unable to confirm if this union will fit.
i asked a question about pump union #52201000 . i needed to know if the price listed was for 2 unions or just 1. got a message that you had answered my question but when i went to see the answer there was none.
Hello John, it is only for one.
is part #52201000 pump union sold in pairs for the price listed or only 1? one picture shows 2 unions.
That would be for a single union.